LC66PG5XX View Datasheet(PDF) - SANYO -> Panasonic
Part Name
Description
Manufacturer
LC66PG5XX
SANYO -> Panasonic
LC66PG5XX Datasheet PDF : 14 Pages
| |||
LC66PG5XX
Notes on use
1. The port output format for the LC66PG5XX is as follows : The Pch OD format is employed only for port 8. The Nch
OD format is employed for the rest. Add resistors to each port according to the port output formats employed for
production chips.
•When optional pull-up resistors are selected for ports P0, P1, P4, P5, P7, PA and PB, add resistors of about 10kΩ
to them and connect the port to the VDD terminal.
•When the optional CMOS output format is selected for port P8, add the resistor of about 1kΩ to it and connect the
port to the VSS terminal. Select the resistor in the range of 0.5kΩ to 10kΩ according to load balance.
•When the optional CMOS output format is selected for ports P2, P3 (P33 not included), P6, P9 and PC, add the
resistors of about 10 kΩ to them and connect them to the VDD terminal. (add the resistors of more than 1 kΩ if sink
current is used.)
2. The LC66PG5XX has no feedback resistors. Add the external feedback resistor of about 1 MΩ to the LC66PG5XX
when the ceramic resonator oscillation is selected. The external capacitance is the same as that of production chips.
3. The constants and oscillation characteristics of the RC (resistor and capacitor) oscillation circuit are different from
those of production chips. Set them to the oscillation frequency of production chips by making adjustments to volume
resistor.
4. The operating voltage level of the LC66PG5XX must be within the range of the operating voltage of the EPROM and
other ICs.
That is, the level is : VDD=5Vwith 5% margin.
5. The operating environment temperature is in the range of 10°C to 40°C.
Absolute maximum ratings at Ta = 25˚C, VSS = 0V
Parameter
Symbol
Terminal and note
Maximum voltage level
Input voltage
Output voltage
Output current per terminal
VDD max
VIN1
VIN2
VOUT1
VOUT2
ION1
ION2
VDD
P2, P3(P33/HOLD not included),
P6
Other inputs
P2, P3(P33/HOLD not included),
P6, P7 and PA
Other outputs
P0, P1, P2, P3(P33/HOLD not
included), P4, P5, P6, P8, P9 and
PC
P7, PA, PB
Total terminal current
–IOP2
∑ ION1
∑ ION2
P8
P2, P3(P33/HOLD not included),
P4, P5, P6, P7 and P8
P0, P1, P9, PA, PB, PC
–∑ IDP1
8
Allowable power dissipation
Pd max
Ta=10 to 40° C
Condition
DIC-64S
Ratings
Unit
–0.3 to +7.0 V
–0.3 to +15.0 V
–0.3 to VDD+3.0
V
–0.3 to +15.0 V
–0.3 to VDD+3.0
V
4 mA
Note
1
2
1
2
3
20 mA
3
4 mA
4
75 mA
3
75 mA
3
25 mA
4
600 mW
Operating temperature
Topr
+10 to +40 °C
Storage tempurature
Tstg
+55 to +125 °C
Note 1: Applicable only when open drain output format is selected. If the format is not selected, another standard value
is used.
Note 2: The self oscillation voltage level can be included in the standard value range as far as oscillation input/output is
concerned.
Note 3: Sink current (applicable to P8 only when CMOS output format is selected).
Note 4: Source current (applicable to terminals other than P8 only when pull-up output format or CMOS output format
is selected).
No.2648–8/14
Share Link: