MPC8349VVAGDB View Datasheet(PDF) - Freescale Semiconductor

Part Name

Description

Manufacturer

MPC8349VVAGDB

PowerQUICC II Pro Integrated Host Processor Hardware Specifications

Freescale Semiconductor 

Overview

— Complies with USB specification Rev. 2.0

— Can operate as a stand-alone USB device

– One upstream facing port

– Six programmable USB endpoints

— Can operate as a stand-alone USB host controller

– USB root hub with one downstream-facing port

– Enhanced host controller interface (EHCI) compatible

– High-speed (480 Mbps), full-speed (12 Mbps), and low-speed (1.5 Mbps) operations

— External PHY with UTMI, serial and UTMI+ low-pin interface (ULPI)

• Universal serial bus (USB) multi-port host controller

— Can operate as a stand-alone USB host controller

– USB root hub with one or two downstream-facing ports

– Enhanced host controller interface (EHCI) compatible

– Complies with USB Specification Rev. 2.0

— High-speed (480 Mbps), full-speed (12 Mbps), and low-speed (1.5 Mbps) operations

— Direct connection to a high-speed device without an external hub

— External PHY with serial and low-pin count (ULPI) interfaces

• Local bus controller (LBC)

— Multiplexed 32-bit address and data operating at up to 133 MHz

— Eight chip selects for eight external slaves

— Up to eight-beat burst transfers

— 32-, 16-, and 8-bit port sizes controlled by an on-chip memory controller

— Three protocol engines on a per chip select basis:

– General-purpose chip select machine (GPCM)

– Three user-programmable machines (UPMs)

– Dedicated single data rate SDRAM controller

— Parity support

— Default boot ROM chip select with configurable bus width (8-, 16-, or 32-bit)

• Programmable interrupt controller (PIC)

— Functional and programming compatibility with the MPC8260 interrupt controller

— Support for 8 external and 35 internal discrete interrupt sources

— Support for 1 external (optional) and 7 internal machine checkstop interrupt sources

— Programmable highest priority request

— Four groups of interrupts with programmable priority

— External and internal interrupts directed to host processor

— Redirects interrupts to external INTA pin in core disable mode.

— Unique vector number for each interrupt source

MPC8349EA PowerQUICC II Pro Integrated Host Processor Hardware Specifications, Rev. 13

Freescale Semiconductor

5

Share Link: