LXM1596-01 View Datasheet(PDF) - Microsemi Corporation
Part Name
Description
Manufacturer
LXM1596-01 Datasheet PDF : 5 Pages
| |||
PRODUCT DATABOOK 1996/1997
WIDE INPUT CCFL INVERTER MODULES
Not Recommended for New Designs
P ATENT P ENDING
LXM1596-01
Conn.
CN1
CN1-1
CN1-2
CN1-3
CN1-4
CN1-5
CN1-6
CN1-7
CN1-8
CN2
CN2-1
CN2-2
FUNCTIONAL PIN DESCRIPTION
Pin
Description
VIN
N.C.
GND
SLEEP
BRITE
VREF
Input voltage. (+7 to +30VDC)
No Connect.
Power supply return.
Logical high on this pin enables inverter operation. Logical low removes power from the module and
the lamp. A floating input is sensed as a logical low and will disable inverter operation. If not used,
connect SLEEP through a 33kΩ resistor to V or directly to any voltage between 2.5 and 5.5V.
IN
Brightness control input. Apply 0.8 to 2.5 volts DC to control lamp brightness. Lamp current varies
linearly with input voltage. 2.5V gives maximum brightness.
Reference Voltage Output. 2.5V @ 500µA max. For use with external dimming circuit.
LAMP LO
LAMP HI
High voltage connection to low side of lamp. Connect to lamp terminal with longer lead length. Do not
connect to ground.
High voltage connection to high side of lamp. Connect to lamp terminal with shortest lead length. Do not
connect to ground.
.40
(10.16)
1-1
.83
(21.08)
1-8
Connector CN-1
.315 Max. (8)
MECHANICAL OUTLINE
4.76 (120.9)
4.05 (102.9)
.21 (5.33)
2-2
.500 (12.7)
2-1
0.125 (3.18) Diameter Hole, 2 places
No other holes on board.
Connector CN-2
Warning!!
High Voltage
Present
.031 (0.8)
All dimensions in inches (mm)
Connectors:
CN-1 = MOLEX 53261-0890
Recommended Mate:
Pins: 50079-8100*, Housing: 51021-0800
* Loose (-8000, Chain) Recommended #26 AWG wiring
CN-2 = JST SM02(8.0) B-BHS-TB
Pins: 5BH-001T-P0.5, Housing: BHR-03VS-1
Note: All samples are equipped with connector mates and cable.
Copyright © 1998
Rev. 0.7a 10/00
3
Share Link: 