ENWC9B01A1EF View Datasheet(PDF) - Panasonic Corporation
Part Name
Description
Manufacturer
ENWC9B01A1EF Datasheet PDF : 61 Pages
| |||
ï
802.15.4 and Bluetooth LE Module
Overview
The PAN4620 is Panasonic’s Internet of Things dual
mode module comprising the NXP® Kinetis®
MKW41Z512CAT4 SoC – a 2.4 GHz 802.15.4 and
Bluetooth Low Energy wireless radio microcontroller
based on an ARM® Cortex® M0+.
Features
• UART, SPI, I²C, TSI, ADC, and DAC
• Same form factor and compatible pinout for
VCC, GND, Reset, UART, I²C, and SWD as
PAN1026, PAN1760, PAN1760A, and PAN1761
• Single and concurrent operation of IEEE
802.15.4 and Bluetooth Low Energy
• Open to various known application layers or
proprietary solutions
• Surface Mount Type dimensions:
15.6 mm x 8.7 mm x 1.9 mm
• On module 32 MHz and 32 kHz crystal
• SoC: NXP Kinetis KW41Z – 2.4 GHz 802.15.4
and Bluetooth Low Energy 4.2 Wireless Radio
Microcontroller
• Core: Up to 48 MHz 32 bit ARM Cortex-M0+
• Memory: 512 kB of flash and 128 kB of SRAM
• Voltage range: 1.8 V to 4.2 V
• Temperature range: -40 °C to 85 °C
Block Diagram
Characteristics
• Transceiver frequency range 2 360 MHz to
2 483.5 MHz
• Programmable transmitter output power:
-30 dBm to 3.5 dBm (Power and sensitivity
measured at chip output)
• Typical receiver sensitivity Bluetooth Low Energy
@1Mbps: -95 dBm
• Typical receiver sensitivity typical for IEEE
Standard 802.15.4 @250 kbps: -100 dBm
• Typical transmitter current consumption 7.6 mA
(6.1 mA for Tx, 0dBm, 3.6 V)
• Typical receiver current consumption 8.4 mA
(6.8 mA for RX, 3.6 V)
Bluetooth
• Bluetooth Low Energy 4.2 compliant
implementation certified by Bluetooth SIG
• Supporting software consisting of
Bluetooth Low Energy host stack and profiles
and IPv6 over Bluetooth Low Energy
• Bluetooth Developer Studio Plug-In
IEEE 802.15.4
• IEEE standard 802.15.4 compliant
• Supporting software consisting of 802.15.4
MAC/PHY implementation, Simple Media Access
Controller (SMAC), and the NXP certified Thread
stack
Product Specification Rev. 1.1
Page 2
Share Link: 