PRELIMINARY
ELECTRICAL TABLES (Continued)
SYMBOL
PIN DIODE DRIVERS
VOUT High
Low
IOUT High
Low
PARAMETER
CONDITIONS
ML2751
MIN
TYP
MAX UNITS
VCC –0.3
V
0.3
10
mA
–10
Note 1: Limits are guaranteed by 100% testing, sampling, or correlation with worst case test conditions.
Note 2: PA turn on is measured from the rising edge of either PAON or FEEN to 90% of the programmed power output.
Note 3: PA power measurements are made at the output of the external harmonic filter under the following conditions: 0dBm input drive at 915MHz; the resistor on
TPA is set for +20dBm ±0.5dB output power; the TPS signal is 1V.
January, 2000 PRELIMINARY DATASHEET
9