56F802X Просмотр технического описания (PDF) - Freescale Semiconductor

Номер в каталоге

Компоненты Описание

производитель

56F802X

16-bit Digital Signal Controllers

Freescale Semiconductor 

Version History

Rev. 0

Rev. 1

Rev. 2

Rev. 3

Document Revision History

Description of Change

Initial public release.

• In Table 5-3, changed the ITCN_BASE address from $00 F060 (incorrect value) to

$00 F0E0 (the correct value).

• In Table 10-4, added an entry for flash data retention with less than 100 program/erase

cycles (minimum 20 years).

• In Table 10-6, changed the device clock speed in STOP mode from 8MHz to 4MHz.

• In Table 10-12, changed the typical relaxation oscillator output frequency in Standby mode

from 400kHz to 200kHz.

• Changed input propagation delay values in Table 10-20 as follows:

Old values: 1 μs typical, 2 μs maximum

New values: 35 ns typical, 45 ns maximum

• In Table 10-19, changed the maximum ADC internal clock frequency from 8MHz to

5.33MHz.

• Replaced the case outline schematics in Figure 11-2, Figure 11-3, and Figure 11-4.

Added the following note to the description of the TMS signal in Table 2-3:

Note: Always tie the TMS pin to VDD through a 2.2K resistor.

Please see http://www.freescale.com for the most current data sheet revision.

56F8025 Data Sheet, Rev. 3

2

Freescale Semiconductor

Preliminary

Share Link: