73S8014R-IL/F Просмотр технического описания (PDF) - Teridian Semiconductor Corporation

Номер в каталоге

Компоненты Описание

производитель

73S8014R-IL/F

Smart Card Interface

Teridian Semiconductor Corporation 

73S8014R Data Sheet

DS_8014R_012

2 Electrical Specifications

This section provides the following:

ƒ Absolute maximum ratings

ƒ Recommended operating conditions

ƒ Package thermal parameters

ƒ Smart card interface requirements

ƒ Digital signals characteristics

ƒ DC Characteristics

ƒ Voltage Fault Detection Circuits

2.1 Absolute Maximum Ratings

Table 2 lists the maximum operating conditions for the 73S8014R. Permanent device damage may occur if

absolute maximum ratings are exceeded. Exposure to the extremes of the absolute maximum rating for extended

periods may affect device reliability. The smart card interface pins are protected against short circuits to VCC,

ground, and each other.

Table 2: Absolute Maximum Device Ratings

Parameter

Supply Voltage VDD

Supply Voltage VPC

Input Voltage for Digital Inputs

Storage Temperature

Pin Voltage (except card interface)

Pin Voltage (card interface)

ESD Tolerance – Card interface pins

ESD Tolerance – Other pins

Rating

-0.5 to 6.0 VDC

-0.5 to 6.0 VDC

-0.3 to (VDD +0.5) VDC

-60 to 150°C

-0.3 to (VDD +0.5) VDC

-0.3 to (VCC + 0.5) VDC

+/- 6kV

+/- 2kV

*Note: ESD testing on smart card pins is HBM condition, 3 pulses, each polarity referenced to ground.

Note: Smart Card pins are protected against shorts between any combinations of Smart Card pins.

2.2 Recommended Operating Conditions

Function operation should be restricted to the recommended operating conditions specified in Table 3.

Table 3: Recommended Operating Conditions

Parameter

Supply Voltage VDD

Supply Voltage VPC

Ambient Operating Temperature

Input Voltage for Digital Inputs

Rating

2.7 to 5.5 VDC

4.75 to 5.5 VDC

-40°C to +85°C

0V to VDD + 0.3V

8

Rev. 1.0

Share Link: