74LVC16244ABQ Просмотр технического описания (PDF) - NXP Semiconductors.

Номер в каталоге

Компоненты Описание

производитель

74LVC16244ABQ

16-bit buffer/line driver; 5 V input/output tolerant; 3-state

NXP Semiconductors. 

74LVC16244A; 74LVCH16244A

16-bit buffer/line driver; 5 V input/output tolerant; 3-state

Rev. 09 — 18 March 2010

Product data sheet

1. General description

The 74LVC16244A; 74LVCH16244A are 16-bit non-inverting buffer/line drivers with

3-state bus compatible outputs. The device can be used as four 4-bit buffers, two 8-bit

buffers or one 16-bit buffer. It features four output enable inputs, (1OE to 4OE) each

controlling four of the 3-state outputs. A HIGH on nOE causes the outputs to assume a

high-impedance OFF-state.

Inputs can be driven from either 3.3 V or 5 V devices. When disabled, up to 5.5 V can be

applied to the outputs. These features allow the use of these devices in mixed

3.3 V and 5 V applications.

The 74LVCH16244A bus hold on data inputs eliminates the need for external pull-up

resistors to hold unused inputs.

2. Features and benefits

„ 5 V tolerant inputs/outputs for interfacing with 5 V logic

„ Wide supply voltage range from 1.2 V to 3.6 V

„ CMOS low power consumption

„ Multibyte flow-through standard pin-out architecture

„ Low inductance multiple power and ground pins for minimum noise and ground

bounce

„ Direct interface with TTL levels

„ High-impedance when VCC = 0 V

„ All data inputs have bus hold. (74LVCH16244A only)

„ Complies with JEDEC standard JESD8-B / JESD36

„ ESD protection:

‹ HBM JESD22-A114F exceeds 2000 V

‹ MM JESD22-A115-A exceeds 200 V

„ Specified from −40 °C to +85 °C and −40 °C to +125 °C

Share Link: