A67L06361 Просмотр технического описания (PDF) - AMIC Technology
Номер в каталоге
Компоненты Описание
производитель
A67L06361 Datasheet PDF : 18 Pages
| |||
A67L16181/A67L06361 Series
Pin Description
Pin No.
LQFP (X18)
LQFP (X36)
37
36
35,34,33,32,
100,99,82,81
44,45,46,47,
48,49,50,83,84
43
80
93 (BW1)
94 (BW2 )
37
36
35,34,33,32,
100,99,82,81
45,46,47,48,
49,50,83,84,43
44
93 (BW1)
94 (BW2 )
95 (BW3 )
96 (BW4 )
89
89
98
98
92
92
97
97
86
86
85
85
87
87
Symbol
Description
A0
A1
A2 – A9
A11-A19
A20
A10
BW1
BW2
BW3
BW4
CLK
CE
CE2
CE2
OE
ADV/ LD
CEN
Synchronous Address Inputs : These inputs are registered and
must meet the setup and hold times around the rising edge of
CLK. Pins 83 and 84 are reserved as address bits for higher-
density 9Mb and 18Mb DBA SRAMs, respectively. A0 and A1 are
the two lest significant bits (LSB) of the address field and set the
internal burst counter if burst is desired.
Synchronous Byte Write Enables : These active low inputs allow
individual bytes to be written when a WRITE cycle is active and
must meet the setup and hold times around the rising edge of
CLK. BYTE WRITEs need to be asserted on the same cycle as
the address, BWs are associated with addresses and apply to
subsequent data. BW1 controls I/Oa pins; BW2 controls I/Ob pins;
BW3 controls I/Oc pins; BW4 controls I/Od pins.
Clock : This signal registers the address, data, chip enables, byte
write enables and burst control inputs on its rising edge. All
synchronous inputs must meet setup and hold times around the
clock’s rising edge.
Synchronous Chip Enable : This active low input is used to enable
the device. This input is sampled only when a new external
address is loaded (ADV/LD LOW).
Synchronous Chip Enable : This active low input is used to enable
the device and is sampled only when a new external address is
loaded (ADV/LD LOW). This input can be used for memory depth
expansion.
Synchronous Chip Enable : This active high input is used to
enable the device and is sampled only when a new external
address is loaded (ADV/LD LOW). This input can be used for
memory depth expansion.
Output Enable : This active low asynchronous input enables the
data I/O output drivers.
Synchronous Address Advance/Load : When HIGH, this input is
used to advance the internal burst counter, controlling burst
access after the external address is loaded. When HIGH, R/ W is
ignored. A LOW on this pin permits a new address to be loaded at
CLK rising edge.
Synchronous Clock Enable : This active low input permits CLK to
propagate throughout the device. When HIGH, the device ignores
the CLK input and effectively internally extends the previous CLK
cycle. This input must meet setup and hold times around the
rising edge of CLK.
PRELIMINARY (February, 2005, Version 0.1)
6
AMIC Technology, Corp.
Share Link: 