DS21T07 Просмотр технического описания (PDF) - Dallas Semiconductor -> Maxim Integrated

Номер в каталоге

Компоненты Описание

производитель

DS21T07

SCSI Terminator

Dallas Semiconductor -> Maxim Integrated 

TYPICAL SCSI BUS CONFIGURATION Figure 2

DS21T07

DS21T07

DS21T07

NOTES:

1. C1 = 4.7 µF tantalum

C2 = 2.2 µF tantalum or 4.7 µF aluminum

2. If the DS21T07 is to be embedded into a peripheral that will act as a target on a SCSI bus, it is that

recommended TERMPWR be derived from the SCSI cable, not generated locally. In this

configuration, if a power failure occurs in the peripheral, it will not affect the bus.

3. A high frequency bypass capacitor (0.1 µF recommended) can be added in parallel to C1 for

applications using fast rise/fall time drivers.

3 of 7

Share Link: