MAX870C/D Просмотр технического описания (PDF) - Maxim Integrated
Номер в каталоге
Компоненты Описание
производитель
MAX870C/D Datasheet PDF : 8 Pages
| |||
Switched-Capacitor Voltage Inverters
…
+VIN
2
2
3
3
C1
4 MAX870
C1
4 MAX870
MAX871
5
“1”
1
5
MAX871
“n”
1 VOUT
…
C2
C2
VOUT = -nVIN
…
+VIN
2
2
3
3
C1
4 MAX870
MAX871
C1
5
“1”
1
4 MAX870
MAX871
5
“n”
1
VOUT
…
ROUT
=
ROUT OF SINGLE DEVICE
NUMBER OF DEVICES
VOUT = -VIN
C2
Figure 4. Cascading MAX870s or MAX871s to Increase
Output Voltage
capacitors. Because both the inverter and doubler use
part of the charge-pump circuit, loading either output
causes both outputs to decline toward GND. Make sure
the sum of the currents drawn from the two outputs
does not exceed 40mA.
Heavy Output Current Loads
Under heavy loads, where higher supply is sourcing cur-
rent into OUT, the OUT supply must not be pulled above
ground. Applications that sink heavy current into OUT
require a Schottky diode (1N5817) between GND and
OUT, with the anode connected to OUT (Figure 7).
Layout and Grounding
Good layout is important, primarily for good noise per-
formance. To ensure good layout, mount all compo-
nents as close together as possible, keep traces short
to minimize parasitic inductance and capacitance, and
use a ground plane.
Figure 5. Paralleling MAX870s or MAX871s to Reduce Output
Resistance
+VIN
D1, D2 = 1N4148
3
2
C1
4
MAX870
D1
MAX871
5
1
VOUT = -VIN
C2
D2
VOUT = (2VIN) -
C3
C4 (VFD1) - (VFD2)
Figure 6. Combined Doubler and Inverter
GND 4
MAX870
MAX871
OUT 1
Figure 7. High V- Load Current
_______________________________________________________________________________________ 7
Share Link: 