MC-4516CB64ES Просмотр технического описания (PDF) - NEC => Renesas Technology
Номер в каталоге
Компоненты Описание
производитель
MC-4516CB64ES Datasheet PDF : 16 Pages
| |||
MC-4516CB64ES, 4516CB64PS
5 DC Characteristics (Recommended Operating Conditions unless otherwise noted)
Parameter
Symbol
Test condition
MIN. MAX. Unit Notes
Operating current
ICC1 Burst length = 1,
/CAS latency = 2
800 mA 1
Precharge standby current
ICC2P
tRC ≥ tRC (MIN.), IO = 0 mA
CKE ≤ VIL (MAX.), tCK = 15 ns
/CAS latency = 3
840
8 mA
in power down mode
ICC2PS CKE ≤ VIL (MAX.), tCK = ∞
8
Precharge standby current
in non power down mode
ICC2N
CKE ≥ VIH (MIN.), tCK = 15 ns, /CS ≥ VIH (MIN.),
Input signals are changed one time during 30 ns.
160 mA
Active standby current in
ICC2NS CKE ≥ VIH (MIN.), tCK = ∞, Input signals are stable.
ICC3P CKE ≤ VIL (MAX.), tCK = 15 ns
64
40 mA
power down mode
ICC3PS CKE ≤ VIL (MAX.), tCK = ∞
32
Active standby current in
non power down mode
ICC3N
CKE ≥ VIH (MIN.), tCK = 15 ns, /CS ≥ VIH (MIN.),
Input signals are changed one time during 30 ns.
240 mA
ICC3NS CKE ≥ VIH (MIN.), tCK = ∞, Input signals are stable.
160
Operating current
ICC4
tCK ≥ tCK (MIN.), IO = 0 mA
/CAS latency = 2
680 mA 2
(Burst mode)
/CAS latency = 3
1,000
CBR (Auto) refresh current
ICC5
tRC ≥ tRC (MIN.)
/CAS latency = 2
1,760 mA 3
/CAS latency = 3
1,760
Self refresh current
Input leakage current
Output leakage current
ICC6 CKE ≤ 0.2 V
II (L) VI = 0 to 3.6 V, All other pins not under test = 0 V
IO (L) DOUT is disabled, VO = 0 to 3.6 V
16 mA
– 8 + 8 µA
– 1.5 + 1.5 µA
High level output voltage
VOH IO = – 4.0 mA
2.4
V
Low level output voltage
VOL IO = + 4.0 mA
0.4 V
Notes 1. ICC1 depends on output loading and cycle rates. Specified values are obtained with the output open. In
addition to this, ICC1 is measured on condition that addresses are changed only one time during tCK (MIN.).
2. ICC4 depends on output loading and cycle rates. Specified values are obtained with the output open. In
addition to this, ICC4 is measured on condition that addresses are changed only one time during tCK (MIN.).
3. ICC5 is measured on condition that addresses are changed only one time during tCK (MIN.).
6
Data Sheet M13611EJ5V0DS00
Share Link: 