MC-458CB64ESB Просмотр технического описания (PDF) - NEC => Renesas Technology
Номер в каталоге
Компоненты Описание
производитель
MC-458CB64ESB Datasheet PDF : 16 Pages
| |||
MC-458CB64ESB, 458CB64PSB
DC Characteristics (Recommended Operating Conditions unless otherwise noted)
Parameter
Symbol
Test condition
MIN. MAX. Unit Notes
Operating current
ICC1 Burst length = 1, tRC ≥ tRC(MIN.)
IO = 0 mA
/CAS latency = 2
/CAS latency = 3
440 mA 1
440
Precharge standby current ICC2P CKE ≤ VIL(MAX.), tCK = 15 ns
5 in power down mode
ICC2PS CKE ≤ VIL(MAX.), tCK = ∞
Precharge standby current ICC2N CKE ≥ VIH(MIN.), tCK = 15 ns, /CS ≥ VIH(MIN.),
in non power down mode
Input signals are changed one time during 30 ns.
4 mA
4
80 mA
Active standby current in
ICC2NS CKE ≥ VIH(MIN.), tCK = ∞, Input signals are stable.
ICC3P CKE ≤ VIL(MAX.), tCK = 15 ns
32
20 mA
power down mode
Active standby current in
non power down mode
ICC3PS CKE ≤ VIL(MAX.), tCK = ∞
ICC3N CKE ≥ VIH(MIN.), tCK = 15 ns, /CS ≥ VIH(MIN.),
Input signals are changed one time during 30 ns.
16
120 mA
Operating current
ICC3NS CKE ≥ VIH(MIN.), tCK = ∞, Input signals are stable.
ICC4 tCK ≥ tCK(MIN.) , IO = 0 mA
/CAS latency = 2
80
400 mA 2
(Burst mode)
/CAS latency = 3
560
CBR (Auto) refresh current ICC5 tRC ≥ tRC(MIN.)
/CAS latency = 2
880 mA 3
/CAS latency = 3
880
Self refresh current
ICC6 CKE ≤ 0.2 V
8 mA
Input leakage current
Output leakage current
II(L) VI = 0 to 3.6 V, All other pins not under test = 0 V
IO(L) DOUT is disabled, VO = 0 to 3.6 V
– 4 + 4 µA
– 1.5 + 1.5 µA
High level output voltage
VOH IO = – 4.0 mA
2.4
V
Low level output voltage
VOL IO = + 4.0 mA
0.4 V
Notes 1. ICC1 depends on output loading and cycle rates. Specified values are obtained with the output open. In
addition to this, ICC1 is measured on condition that addresses are changed only one time during tCK(MIN.).
2. ICC4 depends on output loading and cycle rates. Specified values are obtained with the output open. In
addition to this, ICC4 is measured on condition that addresses are changed only one time during tCK(MIN.).
3. ICC5 is measured on condition that addresses are changed only one time during tCK(MIN.).
6
Data Sheet M12263EJAV0DS00
Share Link: 