MX205Q Просмотр технического описания (PDF) - Unspecified

Номер в каталоге

Компоненты Описание

производитель

MX205Q

Low Cost, 5.0g, Dual Axis Accelerometer with Analog Outputs

Unspecified 

Printed Circuit Board Layout and

Filter Requirements

Data Sheet

MX205Q

Page 8 of 8

R3=

C3=

R4=

C4=

Layout Notes

1. Use robust low inductance ground

wiring

2. Liberal use of ceramic bypass

capacitors

3. The capacitors should be located

as close as possible to the device

supply pins (VDA, VDD).

4. The capacitor lead length should

be as short as possible. Surface

mount capacitors are preferred.

Filtering Notes

1. Low pass filter – 200Hz, -3db

2. Ceramic capacitors C3, C4

3. f = 1/2πRC

4. Resistor R3, R4 – 1/8 Watt,

5% tolerance

5. Reference Application Note

# AN-00MX-004

Information furnished by MEMSIC is believed to be

accurate and reliable. However, no responsibility is

assumed by MEMSIC for its use, nor for any infringe-

ments of patents or other rights of third parties which

may result from its use. No license is granted by

implications or otherwise under any patent or patent

rights of MEMSIC.

Technical information.

Subject to change without notice.

MX201Q ANALOG Data Sheet N 8/1/01

®MEMSIC, Inc. 2000.

100 Burtt Road, Andover, MA 01810

Tel: 978.623.8188 • Fax: 978.623.9945

www.memsic.com

Share Link: