S6B0718
104 SEG / 81 COM DRIVER & CONTROLLER FOR STN LCD
INTRODUCTION
The S6B0718 is a driver & controller LSI for graphic dot-matrix liquid crystal display systems. It contains 81 common
and 104 segment driver circuits. This chip is connected directly to a microprocessor, accepts serial or 8-bit parallel
display data and stores in an on-chip display data RAM of 89 x 104 bits. It provides a highly flexible display section
due to 1-to-1 correspondence between on-chip display data RAM bits and LCD panel pixels. And it performs display
data RAM read/write operation with no externally operating clock to minimize power consumption. In addition,
because it contains power supply circuits necessary to drive liquid crystal, it is possible to make a display system
with the fewest components.
FEATURES
Driver Output Circuits
− 81 common outputs / 104 segment outputs
Applicable Duty Ratios
Programmable duty ratio
Applicable LCD bias
Maximum display area
1/9 to 1/81
− Various partial display
− Partial window moving & data scrolling
1/4 to 1/11
81 × 104
On-chip Display Data RAM
− Capacity: 89 x 104 = 9,256 bits
− Bit data "1": a dot of display is illuminated.
− Bit data "0": a dot of display is not illuminated.
Microprocessor Interface
− 8-bit parallel bi-directional interface with 6800-series or 8080-series
− Serial interface (only write operation) available
On-chip Low Power Analog Circuit
− On-chip oscillator circuit
− Voltage converter (x3, x4, x5 or x6)
− Voltage regulator (temperature coefficient: -0.05%/°C or external input)
− On-chip electronic contrast control function (64 steps)
− Voltage follower (LCD bias: 1/4 to 1/11)
Operating Voltage Range
− Supply voltage (VDD): 2.4 to 3.6 V
− LCD driving voltage (VLCD = V0 - VSS): 4.0 to 15.0 V
Low power Consumption
− 150 µΑ Max. (VDD = 3V, x5 boosting, V0 = 12V, internal power supply on and display OFF)
− 15 µΑ Max. (during power save [standby] mode)
Package Type
− Gold bumped chip or TCP
1