DatasheetQ Logo
Electronic component search and free download site. Transistors,MosFET ,Diode,Integrated circuits

SY88992LMG Просмотр технического описания (PDF) - Micrel

Номер в каталоге
Компоненты Описание
производитель
SY88992LMG
Micrel
Micrel 
SY88992LMG Datasheet PDF : 11 Pages
1 2 3 4 5 6 7 8 9 10
Micrel, Inc.
SY88992L
AC Electrical Characteristics
TA = -40°C to +80°C and VCC = 3.0 to 3.6V, unless otherwise noted. Typical values are at VCC = 3.3V, TA = 25°C,
IMOD = 13mA(5), and AC-coupled 50Ω load to ground with 75Ω pull-up (see Figure below).
Symbol Parameter
Condition
Min Typ Max Units
tOFF(6)
tON(7)
Data Rate
Turn OFF Time
Turn ON Time
NRZ
50Ω load
50Ω load
0.1
4.25 Gbps
1
1.5
ns
1.8 2.5
ns
tr
Output Current Rise Time
tf
Output Current Fall Time
20% to 80%, IMOD = 13mA, no
peaking, 50Ω load
20% to 80%, IMOD = 13mA,
IP/IMOD=20%, RIPD=1.5k
20% to 80%, IMOD = 13mA, no
peaking, 50Ω load
20% to 80%, IMOD = 13mA,
IP/IMOD=20%, RIPD=1.5k
65
95
ps
60
75
ps
65
95
ps
60
75
ps
Total Jitter
@ 2.5Gbps data rate, 50Ω load
30
psPP
Pulse-Width Distortion
50Ω load
20
ps
(IP / IMOD)
Max
tP
Maximum Peaking Current-to-
Modulation Current Ratio
Peaking Current Duration(8)
IMOD = 13mA, RIPD_SET = 0
35
%
150
ps
Notes:
5. IMOD is defined as the current at the output of the driver. That current splits between the pull-up network at the output and the VCSEL. For a
nominal pull-up resistor of 75Ω at the output of the driver and a nominal 50VCSEL equivalent resistor, 60% of that current goes to the
VCSEL.
6. Turn-OFF time is defined as the delay between the time the signal at /EN rises to 50% of its amplitude and the time when the output of the
driver reaches 10% of its steady-state amplitude.
7. Turn-ON time is defined as the delay between the time the signal at /EN falls to 50% of its amplitude and the time when the output of the
driver reaches 90% of its steady-state amplitude.
8. The peaking current duration is the time between the start of the peaking current, which is the same as the start of the modulation current
transition, and the time when the peaking current reaches its maximum, i.e., the top of the peak.
Test Circuit
January 2006
5
M9999-011306-A
hbwhelp@micrel.com or (408) 955-1690

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]