TA8490F
Reverse rotation detection circuit
By comparing the two phases of the Hall element signal, this circuit detects a state where the phases are
inverted, at which time the torque is reduced to 0. The detection accuracy is determined by the number of pulses
per rotation of Hall element output.
Note: Due to its inertial force, the motor does not stop immediately after the torque is reduced to 0.
Output circuit
This circuit uses the power transistor’s base current to regulate the circuit’s output current.
The upper−stage power transistor consists of a PNP discrete transistor (RN6006), which gives high torque
efficiency.
Current limiter circuit
The current limit value is determined by the equation below.
ILIM ≈
0.24
RF + 0.1
[A]
(typ.)
12
2001-06-13