43143IRZ Просмотр технического описания (PDF) - Renesas Electronics
Номер в каталоге
Компоненты Описание
производитель
43143IRZ
Renesas Electronics
43143IRZ Datasheet PDF : 16 Pages
| |||
ISL43143, ISL43144, ISL43145
Absolute Maximum Ratings
V+ to V- . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.3 to15V
V+ to GND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.3 to15V
V- to GND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -15 to 0.3V
All Other Pins (Note 3) . . . . . . . . . . . . . ((V-) - 0.3V) to ((V+) + 0.3V)
Continuous Current (Any Terminal) . . . . . . . . . . . . . . . . . . . . . 30mA
Peak Current, IN, NO, NC, or COM
(Pulsed 1ms, 10% Duty Cycle, Max) . . . . . . . . . . . . . . . . . 100mA
ESD Rating (Per MIL-STD-883 Method 3015). . . . . . . . . . . . . .>2kV
Operating Conditions
Temperature Range
ISL4314XIX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -40°C to 85°C
Thermal Information
Thermal Resistance (Typical)
JA (°C/W)
16 Ld TSSOP Package (Note 4) . . . . . . . . . . . . . . .
150
16 Ld QFN Package (Note 5). . . . . . . . . . . . . . . . . .
75
Maximum Junction Temperature (Plastic Package) . . . . . . . 150°C
Moisture Sensitivity (See Technical Brief TB363)
All Packages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Level 1
Maximum Storage Temperature Range. . . . . . . . . . . . . -65°C to 150°C
Maximum Lead Temperature (Soldering 10s) . . . . . . . . . . . . 300°C
(TSSOP - Lead Tips Only)
CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation of the
device at these or any other conditions above those indicated in the operational sections of this specification is not implied.
NOTES:
3. Signals on NC, NO, COM, or IN exceeding V+ or V- are clamped by internal diodes. Limit forward diode current to maximum current ratings.
4. JA is measured with the component mounted on a low effective thermal conductivity test board in free air. See Tech Brief TB379 for details.
5. JA is measured in free air with the component mounted on a high effective thermal conductivity test board with “direct attach” features. See
Tech Brief TB379 and Tech Brief TB389.
Electrical Specifications: 5V Supply Test Conditions: VSUPPLY = 4.5V to 5.5V, GND = 0V, VINH = 2.4V, VINL = 0.8V (Note 5),
Unless Otherwise Specified
PARAMETER
TEST CONDITIONS
ANALOG SWITCH CHARACTERISTICS
Analog Signal Range, VANALOG
ON Resistance, RON
VS = 4.5V, ICOM = 10mA, VNO or VNC = 3.5V,
See Figure 5
RON Matching Between Channels, VS = 4.5V, ICOM = 10mA, VNO or VNC = 3V
RON
RON Flatness, RFLAT(ON)
VS = 4.5V, ICOM = 10mA, VNO or VNC = 0V, 3V,
Note 8
NO or NC OFF Leakage Current,
INO(OFF) or INC(OFF)
VS = 5.5V, VCOM = 4.5V, VNO or VNC = +4.5V,
Note 7
COM OFF Leakage Current,
ICOM(OFF)
VS = 5.5V, VCOM = 4.5V, VNO or VNC = +4.5V,
Note 7
COM ON Leakage Current,
ICOM(ON)
VS = 5.5V, VCOM = VNO or VNC = 4.5V, Note 7
DIGITAL INPUT CHARACTERISTICS
Input Voltage High, VINH
Input Voltage Low, VINL
Input Current, IINH, IINL
DYNAMIC CHARACTERISTICS
VS = 5.5V, VIN = 0V or V+
Turn-ON Time, tON
VS = 4.5V, VNO or VNC = 3V, RL = 300, CL = 35pF,
VIN = 0 to 3V, See Figure 1
Turn-OFF Time, tOFF
VS = 4.5V, VNO or VNC = 3V, RL = 300, CL = 35pF,
VIN = 0 to 3V, See Figure 1
Break-Before-Make Time Delay
(ISL43145 only), tD
Charge Injection, Q
NO or NC OFF Capacitance, COFF
VS = 5.5V, VNO or VNC = 3V, RL = 300, CL = 35pF,
VIN = 0 to 3V, See Figure 3
CL = 1.0nF, VG = 0V, RG = 0, See Figure 2
f = 1MHz, VNO or VNC = VCOM = 0V, See Figure 7
TEMP
(°C)
Full
25
Full
25
Full
25
Full
25
Full
25
Full
25
Full
Full
Full
Full
25
Full
25
Full
Full
25
25
(NOTE 6)
MIN
V-
-
-
-
-
-
-
-0.1
-2.5
-0.1
-2.5
-0.2
-5
2.4
-
-1
-
-
-
-
5
-
-
TYP
-
18
-
0.5
-
-
-
-
-
-
-
-
-
1.6
1.5
-
52
-
40
-
19
-
10
(NOTE 6)
MAX UNITS
V+
V
25
30
2
4
5
5
0.1
nA
2.5
nA
0.1
nA
2.5
nA
0.2
nA
5
nA
-
V
0.8
V
1
A
65
ns
75
ns
50
ns
55
ns
-
ns
5
pC
-
pF
FN6037 Rev 4.00
Aug 31, 2017
Page 4 of 16
Share Link: 