Product Specification
CPF101NW
4.3.3. Filter Insertion loss test For POTS Function:
4.3.3.1. Description :
Insertion loss /Attenuation mentioned herein is defined as below :
IL = 20 log 10 Vo/Vi dB
Vi = the voltage value measured is shown in Fig. 3
Vo = the voltage value measured across the Line side shown in Fig. 4
4.3.3.2. Apparatus :
a . Function generator or equivalent
b . Readout oscilloscope or equivalent.
c . Complex load ZL =270 ohm + 750 ohm //150nF
4.3.3.3. Test procedure :
a . Set the measurement Frequency of interest
b . Connecting the source to the Phone side of splitter with the complex load
ZL=270 ohm + 750 ohm //150nF across the Line side.
c . Measure the voltage value and calculate the Insertion loss expressed in
decibel from the equation Insertion loss = 20 log10 Vo / Vi dB
d . Change another frequency of interested the repeat step a~d.
4.3.3.4. Insertion loss test set up measurement :
Fig. 3
ISDN/Phone
ZADSL
Data sheet subject to change without notice
Fig. 4
RDPS-POTS321(R1)03/15/2002
SHEET 9 OF 13