A3PE3000-2PQG208ES 查看數據表（PDF） - Microsemi Corporation

零件编号

产品描述 (功能)

生产厂家

A3PE3000-2PQG208ES

ProASIC3E Flash Family FPGAs with Optional Soft ARM Support

Microsemi Corporation 

ProASIC3E DC and Switching Characteristics

Table 2-2 • Recommended Operating Conditions 1

Symbol

Parameter

Commercial

Industrial Units

TA

TJ

VCC

Ambient temperature

Junction temperature

1.5 V DC core supply voltage

0 to +70

–40 to +85

°C

0 to +85

–40 to +100

°C

1.425 to 1.575 1.425 to 1.575 V

VJTAG

VPUMP

JTAG DC voltage

Programming voltage

Programming Mode2

Operation3

1.4 to 3.6

1.4 to 3.6

V

3.15 to 3.45

3.15 to 3.45

V

0 to 3.6

0 to 3.6

V

VCCPLL

Analog power supply (PLL)

VCCI and VMV 4 1.5 V DC supply voltage

1.425 to 1.575 1.425 to 1.575 V

1.425 to 1.575 1.425 to 1.575 V

1.8 V DC supply voltage

1.7 to 1.9

1.7 to 1.9

V

2.5 V DC supply voltage

2.3 to 2.7

2.3 to 2.7

V

3.3 V DC supply voltage

3.0 V DC supply voltage5

3.0 to 3.6

2.7 to 3.6

3.0 to 3.6

V

2.7 to 3.6

V

LVDS/B-LVDS/M-LVDS differential I/O

2.375 to 2.625 2.375 to 2.625 V

LVPECL differential I/O

3.0 to 3.6

3.0 to 3.6

V

Notes:

1. All parameters representing voltages are measured with respect to GND unless otherwise specified.

2. The programming temperature range supported is Tambient = 0°C to 85°C.

3. VPUMP can be left floating during normal operation (not programming mode).

4. The ranges given here are for power supplies only. The recommended input voltage ranges specific to each I/O

standard are given in Table 2-13 on page 2-16. VMV and VCCI should be at the same voltage within a given I/O bank.

VMV pins must be connected to the corresponding VCCI pins. See the "VMVx I/O Supply Voltage (quiet)" section on

page 3-1 for further information.

5. To ensure targeted reliability standards are met across ambient and junction operating temperatures, Microsemi

recommends that the user follow best design practices using Microsemi’s timing and power simulation tools.

6. 3.3 V wide range is compliant to the JESD8-B specification and supports 3.0 V VCCI operation.

Table 2-3 • Flash Programming Limits – Retention, Storage and Operating Temperature 1

Programming Program Retention Maximum Storage

Product Grade Cycles

(biased/unbiased) Temperature TSTG (°C) 2

Commercial

500

20 years

110

Maximum Operating Junction

Temperature TJ (°C) 2

100

Industrial

500

20 years

110

100

Notes:

1. This is a stress rating only; functional operation at any condition other than those indicated is not implied.

2. These limits apply for program/data retention only. Refer to Table 2-1 on page 2-1 and Table 2-2 for device operating

conditions and absolute limits.

2-2

Revision 13

Share Link: