HR30-6P-6S 查看數據表（PDF） - HIROSE ELECTRIC

零件编号

产品描述 (功能)

生产厂家

HR30-6P-6S

Miniature Waterproof Plastic Connectors

HIROSE ELECTRIC 

HR30 Series●Miniature Waterproof Plastic Connectors

Points to note when using Heat shrink tubing

We recommend that you use shrink tubing over the solder connections in order to protect the soldered wires and to

enhance insulation. However, please be careful when applying heat in this area when installing the shrink tube so

excess heat does not bleed into or affect the resin parts as shown in the figure below.

If the product does become heated beyond the area shown and into the resin parts, please make sure to prevent the

following.

qDeformation of the C ring. This could result in prevention of locking during mating.

wMelting of some parts.

To prevent the deformation of the C rings of the receptacles and the jack, we recommend heat to be applied after

mating with a compatible plug.

Before heating, please mate the plug in the receptacle securely, then pull the back shell for checking whether it is

locked properly. If it is heated with semi-fitting, C ring may be thermally deformed with shrinking condition and it may

not be locked properly.

Receptacle

C ring

Shrinkable tube

Compatible plug

Heat application area

Mated dimensions

Receptacle

Back shell

Heat application area

14

Share Link: