LTC4097 查看數據表（PDF） - Linear Technology

零件编号

产品描述 (功能)

生产厂家

LTC4097

USB/Wall Adapter Standalone Li-Ion/Polymer Battery Charger

Linear Technology 

LTC4097

APPLICATIONS INFORMATION

the nearest 1% value is 105k.

R1 = 0.536 • 105k – 0.4368 • 100k = 12.6k

the nearest 1% value is 12.7k. The final solution is shown

in Figure 5 and results in an upper trip point of 45°C and

a lower trip point of 0°C.

Protecting the USB Pin and Wall Adapter Input from

Overvoltage Transients

Caution must be exercised when using ceramic capaci-

tors to bypass the USBIN or the wall adapter inputs. High

voltage transients can be generated when the USB or wall

adapter is hot plugged. When power is supplied via the

USB bus or wall adapter, the cable inductance along with

the self resonant and high Q characteristics of ceramic

capacitors can cause substantial ringing which could

exceed the maximum voltage ratings and damage the

LTC4097. Refer to Linear Technology Application Note 88,

entitled “Ceramic Input Capacitors Can Cause Overvoltage

Transients” for a detailed discussion of this problem.

Always use an oscilloscope to check the voltage wave-

forms at the USBIN and DCIN pins during USB and wall

adapter hot-plug events to ensure that overvoltage

transients have been adequately removed.

Reverse Polarity Input Voltage Protection

In some applications, protection from reverse polarity

voltage on the input supply pins is desired. If the sup-

ply voltage is high enough, a series blocking diode can

be used. In other cases where the voltage drop must be

kept low, a P-channel MOSFET can be used (as shown in

Figure 6).

DRAIN-BULK

DIODE OF FET

WALL

ADAPTER

LTC4097

DCIN

4097 F06

Figure 6. Low Loss Input Reverse Polarity Protection

4097f

18

Share Link: