MIC5014/5015
Block Diagram
V+ (1)
Charge Pump
15V
Input (2)
*
* Only on the inverting version
Micrel
Gate (5)
Ground (4)
Source (3)
Pin Description
Pin Number
1
2
3
4
5
6, 7, 8
Pin Name
V+
Input
Source
Ground
Gate
NC
Pin Function
Supply. Must be decoupled to isolate from large transients caused by the
power MOSFET drain. 10µF is recommended close to pins 1 and 4.
Turns on power MOSFET when taken above (or below) threshold (1.0V
typical). Pin 2 requires ~ 1µA to switch.
Connects to source lead of power MOSFET and is the return for the gate
clamp zener. Pin 3 can safely swing to –20V when turning off inductive
loads.
Drives and clamps the gate of the power MOSFET.
Not internally connected.
MIC5014/5015
2
1997