CXA3555N
Item
Symbol
Measurement conditions
∆fsw1
VHF operation fOSC = 100MHz
∆f from 3s to 3min after switch ON
Switch ON drift
(PLL not
operating) ∗4
∆fsw2
∆fsw3
VHF operation fOSC = 405MHz
∆f from 3s to 3min after switch ON
UHF operation fOSC = 405MHz
∆f from 3s to 3min after switch ON
∆fsw4
UHF operation fOSC = 845MHz
∆f from 3s to 3min after switch ON
∆fst1
VHF operation fOSC = 100MHz
∆f when VCC 5V changes ±5%
Supply voltage drift ∆fst2
(PLL not
operating) ∗4
∆fst3
VHF operation fOSC = 405MHz
∆f when VCC 5V changes ±5%
UHF operation fOSC = 405MHz
∆f when VCC 5V changes ±5%
∆fst4
UHF operation fOSC = 845MHz
∆f when VCC 5V changes ±5%
Oscillator phase
noise
C/N1
C/N2
VHF operation 10kHz offset CP = 1
Phase comparison frequency = 31.25kHz
UHF operation 10kHz offset CP = 1
Phase comparison frequency = 31.25kHz
Min. Typ. Max. Unit
±300 kHz
±600 kHz
±350 kHz
±400 kHz
±100 kHz
±450 kHz
±100 kHz
±100 kHz
86
dBc/Hz
80
dBc/Hz
∗1 Value measured with untuned input.
∗2 NF meter direct-reading value (DSB measurement).
∗3 Value with a desired reception signal input level of –30dBm, an interference signal of 100kHz/30% AM,
and an interference signal level where S/I = 46dB measured with a spectrum analyzer.
∗4 Value when the PLL is not operating.
–9–