ADP3410
Parameter
Symbol
Conditions
Min
LOW-SIDE DRIVER
Output Resistance, Sourcing Current
VCC = 4.6 V
Output Resistance, Sinking Current
VCC = 4.6 V
DRVL Transition Times2
trDRVL,
VCC = 4.6 V, CLOAD = 3 nF
(See Figure 6)
tfDRVL
DRVL Propagation Delay2, 3
tpdhDRVL
VCC = 4.6 V
5
(See Figure 6)
tpdlDRVL
NOTES
1All limits at temperature extremes are guaranteed via correlation using standard Statistical Quality Control (SQC) methods.
2AC specifications are guaranteed by characterization, but not production tested.
3For propagation delays, tpdh refers to the specified signal going high, tpdl refers to it going low.
4Propagation delay measured until DRVL begins its transition.
5Logic inputs meet typical CMOS I/O conditions for source/sink current (~1 mA).
6Maximum propagation delay = 40 ns max + (1 ns/pF ¥ CDLY).
Specifications subject to change without notice.
Typ Max
2.5 5
2.5 5
20 35
30
25
Unit
W
W
ns
ns
ns
ABSOLUTE MAXIMUM RATINGS*
VCC to PGND . . . . . . . . . . . . . . . . . . . . . . . . –0.3 V to +7 V
BST to PGND . . . . . . . . . . . . . . . . . . . . . . . . –0.3 V to +30 V
BST to SW . . . . . . . . . . . . . . . . . . . . . . . . . . . –0.3 V to +7 V
SW to PGND . . . . . . . . . . . . . . . . . . . . . . . . –2.0 V to +25 V
OVPSET to PGND . . . . . . . . . . . . . . . . . . . . –0.3 V to +10 V
SD, IN, DRVLSD to GND . . . . . . . . . . . . . . –0.3 V to +7.3 V
GND to PGND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ± 0.3 V
Operating Ambient Temperature Range . . . . . . . 0∞C to 85∞C
Operating Junction Temperature Range . . . . . . 0∞C to 125∞C
qJA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155∞C/W
qJC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40∞C/W
Storage Temperature Range . . . . . . . . . . . . –65∞C to +150∞C
Lead Temperature (Soldering, 10 sec) . . . . . . . . . . . . . 300∞C
*This is a stress rating only; operation beyond these limits can cause the device to
be permanently damaged.
ORDERING GUIDE
Model
Temperature Package
Range
Description
Package
Option
ADP3410KRU 0∞C to 85∞C
Thin Shrink Small RU-14
Outline Package
(TSSOP-14)
CAUTION
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily
accumulate on the human body and test equipment and can discharge without detection.
Although the ADP3410 features proprietary ESD protection circuitry, permanent damage may
occur on devices subjected to high-energy electrostatic discharges. Therefore, proper ESD
precautions are recommended to avoid performance degradation or loss of functionality.
WARNING!
ESD SENSITIVE DEVICE
REV. A
–3–