NTE7134 查看數據表（PDF） - NTE Electronics

零件编号

产品描述 (功能)

生产厂家

NTE7134

Integrated Circuit Horizontal and Vertical Deflection Controller for Monitors

NTE Electronics 

Electrical Characteristics (Cont’d): (VP = 12V, TA = +25°C unless otherwise specified)

Parameter

Symbol

Test Conditions

Min Typ Max Unit

Differential Vertical Current Outputs (Cont’d)

Adjustment of Vertical S–Correction [VSCOR (Pin19)]

Vertical S–Correction Adjustment Range

Input Current for Max S–Correction

Input Current for Min S–Correction

Symmetry Error of S–Correction

∆VSCOR

IVSCOR

δVSCOR

IVSCOR = 0, Note 11

–

2

–

%

IVSCOR = –135µA, Note 11 –

46

–

%

–110 –120 –135 µA

–

0

– µA

Maximum ∆VSCOR

–

– ±0.7 %

Reference Voltage at Input

Voltage Amplitude of Superimposed

Logarithmic Sawtooth

(Peak–to–Peak Value)

Vref(VSCOR)

VSAWM(p–p)

Note 12

– 5.0 –

V

–

– 145 mV

Vertical Output Stage [VOUT1 (Pin13) and VOUT2 (Pin12)]

Nominal Differential Output Current

(Peak–to–Peak Value)

(|∆IVOUT| = IVOUT1 – IVOUT2)

Maximum Differential Output Current

(Peak Value)

(|∆IVOUT| = IVOUT1 – IVOUT2)

Allowed Voltage at Outputs

Maximum Offset Error of Vertical

Output Currents

∆IVOUT(nom) Nominal Settings, Note 11 0.76 0.85 0.94 mA

∆IVOUT(max)

0.47 0.52 0.57 mA

VVOUT1, VVOUT2

0

δV(offset)

Nominal Settings, Note 11 –

– 4.2 V

– ±2.5 %

Maximum Linearity Error of Vertical

Output Currents

δV(lin)

Nominal Settings, Note 11

±1.5 %

EW Drive Output

EW Drive Output Stage [EWDRV (Pin11)]

Bottom Output Voltage

(Internally Stabilized)

VEWDRV

VPAR(EWDRV) = 0,

VDC(EWDRV) = 0,

EWTRP Centered

1.05 1.20 1.35 V

Maximum Output Voltage

Note 13

7.0 –

–

V

Output Load Current

IEWDRV

Temperature Coefficient of Output Signal

TCEWDRV

Adjustment of EW Parabola Amplitude [EWPAR (Pin21)]

–

– ±2.0 mA

–

– 600 10–6/K

Parabola Amplitude

VPAR(EWDRV) IEWPAR = 0, Note 11

– 0.05 –

V

IEWPAR = –135µA, Note 11 –

3

–

V

Note 11. All vertical and EW adjustments are specified at nominal vertical settings, which means:

a) ∆VAMP = 100% (IVAMP = 135µA

b) ∆VSCOR = 0 (Pin19 Open–Circuit)

c) ∆VPOS centered (Pin17 forced to GND)

d) fH = 70kHz

Note12. The superimposed logarithmic sawtooth at VSCOR (Pin19) tracks with VPOS, but not with

VAMP settings.

The superimposed waveform is described by

kT

q

x

In

1 –d

1+d

with ’d’ being the modulation

depth of a sawtooth from –5/6 to +5/6. A linear sawtooth with the same modulation depth can

be recovered in an external long–tail pair.

Note13. The output signal at EWDRV (Pin11) may consist of parabola + DC shift + trapezium correc-

tion. These adjustments have to be carried out in a correct relationship to each other to avoid

clipping due to the limited output voltage range at EWDRV.

Share Link: