MP6211/MP6212 –CURRENT-LIMITED POWER DISTRIBUTION SWITCHES
APPLICATION INFORMATION
Power-Supply Considerations
Over 10μF capacitor between IN and GND is
recommended. This precaution reduces power-
supply transients that may cause ringing on the
input and improves the immunity of the device to
short-circuit transients.
In order to achieve smaller output load transient
ripple, placing a high-value electrolytic capacitor
on the output pin(s) is recommended when the
load is heavy.
+5V
1 GND
MP6212
6, 7
2, 3 IN
OUT
4 EN
FLAG 5
To VBUS
USB Ports
SINGLE-CHANNEL
Figure 3—Application Circuit
MP6211_MP6212 Rev. 1.1
www.MonolithicPower.com
9
9/18/2009
MPS Proprietary Information. Unauthorized Photocopy and Duplication Prohibited.
© 2009 MPS. All Rights Reserved.