NCV890103GEVB
A small filtering delay (of duration tPG) ensures that the
RSTB signal doesn’t toggle from high to low in case of high
frequency noise when the output is in regulation.
A pull-up resistor is needed on the RSTB pin, as it features
an open collector output, capable of sinking 1 mA minimum
at 400 mV.
VOUT
The RSTB pin is also pulled low in case of UVLO (VIN
below the UVLO threshold), TSD (temperature shutdown)
or Disable (VEN below the enable threshold) events.
DELAY
VDELU
VDELTH
RSTB
time
time
tRESU
time
Figure 6. Typical Operation of the Reset with Delay Function
http://onsemi.com
6