CXD3511Q 查看數據表（PDF） - Sony Semiconductor

零件编号

产品描述 (功能)

生产厂家

CXD3511Q

Digital Signal Driver/Timing Generator

Sony Semiconductor 

CXD3511Q

(g) CSC_V_MODE[1:0] (sub address: 006h)

This sets the vertical correction point interval for the color shading correction of the color shading correction

block.

Setting value: 0h = 32-line interval, 1h = 64-line interval, 2h = 128-line interval

(h) CSC_G_MODE (sub address: 006h)

This sets the scale correction ON/OFF for the color shading correction of the color shading correction block.

Setting value: 1 = Scale correction ON, 0 = OFF

(i) CSC_R_RGT, CSC_G_RGT and CSC_B_RGT (sub address: 006h)

These set the right/left inversion for the color shading correction block.

Setting value: 1 = Reflects the TG block RGT setting, 0 = Reflects the inverse of TG block RGT setting

(j) CSC_DWN (sub address: 006h)

This sets the up/down inversion for the color shading correction block.

Setting value: 1 = Reflects the TG block DWN setting, 0 = Reflects the inverse of TG block DWN setting

(k) CSC_HP[10:1] (sub address: 007h)

This sets the horizontal correction start position for the color shading correction block in 10 bits. The position

can be set in 2-dot units using the front edge of the HDIN input as the reference. Set the "(correction start

position – 4)/2" value.

(l) CSC_VP[9:0] (sub address: 008h)

This sets the vertical correction start position for the color shading correction block in 10 bits. The position can

be set in 1-line units using the front edge of the VDIN input as the reference. Set the "correction start position

– 3" value.

(m) CSC_HNUM[9:0] and CSC_VNUM[9:0] (sub addresses: 009h and 00Ah)

These set the number of horizontal and vertical correction points for the color shading correction block in 10 bits.

Set the "(number of correction points – 1)" value. The size of the RAM for setting the correction data is 520

words, so set the number of correction points as follows.

Number of horizontal correction points × Number of vertical correction points ≤ 520

(n) CSC_XH_ON (sub address: 005h)

This sets the cross hatch display ON/OFF for the color shading correction block.

Setting value: 1 = Displayed, 0 = Not displayed

– 71 –

Share Link: