CXD2424R
5. External Synchronization - Reset
HD and VD are reset to synchronize with the external sync signal.
Resetting is done to synchronize a plural number of camera systems whose clock frequencies are the same.
There are two reset inputs: HRI and VRI. When their falling edge is detected, resetting is carried out. The
CXD2424R has two reset modes: normal reset and direct reset. Details of the reset modes are described in
the following pages.
In the 1/25s non-interlaced readout mode, the normal reset mode is not supported, and although the direct
reset mode is supported, the field is not identified.
– 16 –