DatasheetQ Logo
Electronic component search and free download site. Transistors,MosFET ,Diode,Integrated circuits

MT16LSDT6464A View Datasheet(PDF) - Micron Technology

Part Name
Description
Manufacturer
MT16LSDT6464A
Micron
Micron Technology Micron
MT16LSDT6464A Datasheet PDF : 24 Pages
First Prev 11 12 13 14 15 16 17 18 19 20 Next Last
256MB / 512MB (x64)
168-PIN SDRAM DIMMs
Commands
The Truth Table provides a quick reference of avail-
able commands. This is followed by written descrip-
tion of each command. For a more detailed descrip-
tion of commands and operations, refer to the 256Mb
SDRAM component data sheet.
Table 9: Truth Table – SDRAM Commands and DQMB Operation
CKE is HIGH for all commands shown except SELF REFRESH; notes appear following the Truth Table
NAME (FUNCTION)
CS# RAS# CAS# WE# DQMB ADDR DQ
COMMAND INHIBIT (NOP)
H
X
X
X
X
X
X
NO OPERATION (NOP)
L
H
H
H
X
X
X
ACTIVE (Select bank and activate row)
L
L
H
H
X Bank/Row X
READ (Select bank and column, and start READ burst) L
H
L
H
L/H Bank/Col X
WRITE (Select bank and column, and start WRITE
burst)
L
H
L
L
L/H Bank/Col Valid
BURST TERMINATE
L
H
H
L
X
X
Active
PRECHARGE (Deactivate row in bank or banks)
AUTO REFRESH or SELF REFRESH
(Enter self refresh mode)
LOAD MODE REGISTER
Write Enable/Output Enable
Write Inhibit/Output High-Z
L
L
H
L
X
Code
X
L
L
L
H
X
X
X
L
L
L
L
X Op-code X
L
Active
H
High-Z
NOTES
1
2
2
3
4, 5
6
7
7
NOTE:
1. A0–A12 provide row address; BA0–BA1 determine which device bank is made active.
2. A0–A9 provide column address; A10 HIGH enables the auto-precharge feature (nonpersistent), while A10 LOW dis-
ables the auto-precharge feature; BA0-BA1 determine which device bank is being read from or written to.
3. A10 LOW: BA0–BA1 determine which device bank is being precharged. A10 HIGH: all device banks are precharged
and BA0, BA1 are “Don’t Care.”
4. This command is AUTO REFRESH if CKE is HIGH, SELF REFRESH if CKE is LOW.
5. Internal refresh counter controls row addressing; all inputs and I/Os are “Don’t Care” except for CKE.
6. A0–A11 define the op-code written to the mode register and A12 should be driven LOW.
7. Activates or deactivates the DQs during WRITEs (zero-clock delay) and READs (two-clock delay).
32,64 Meg x 64 SDRAM DIMMs
SD8_16C32_64x64AG_C.fm - Rev. C 11/02
11
Micron Technology, Inc., reserves the right to change products or specifications without notice.
©2002, Micron Technology Inc.

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]