75MHz, Serial Peripheral Interface Flash Memory
WRITE ENABLE
WRITE ENABLE
The WRITE ENABLE command sets the write enable latch (WEL) bit.
The WEL bit must be set before execution of every PAGE WRITE, PAGE PROGRAM,
PAGE ERASE, and SECTOR ERASE command.
The WRITE ENABLE command is entered by driving chip select (S#) LOW, sending the
command code, and then driving S# HIGH.
Figure 6: WRITE ENABLE Command Sequence
0
C
S#
DQ[0]
DQ1
0
MSB
1
2
3
4
0
0
High-Z
Command bits
0
0
5
1
6
1
7
LSB
0
Don’t Care
PDF: 09005aef845660e5
m45pe80.pdf - Rev. C 03/14 EN
17
Micron Technology, Inc. reserves the right to change products or specifications without notice.
© 2011 Micron Technology, Inc. All rights reserved.