SC-AK240 View Datasheet(PDF) - Panasonic Corporation

Part Name

Description

Manufacturer

SC-AK240

CD Stereo System

Panasonic Corporation 

Cassette tape – Play and record (Continued)

2 Press [0 OPEN] for DECK 1 or [OPEN 0] for DECK 2

and insert the cassette.

Insert with the side to be played facing towards you

and the exposed tape facing down. Close the holder by

hand.

Front

side

By remote control only

record

1) Press [DISC] and then [1] ~ [5] to select

specific

the disc.

discs/tracks

Ensure disc is stopped.

2) Press [PLAY MODE] to select the desired

mode (\ page 7).

3)

For 1-ALBUM mode and 1-SONG mode:

Press [ALBUM ( or )] to select the

album.

3 Press [3, TAPE] to start play.

To

stop tape playback

fast-forward and

rewind

select between

loaded decks

Action

Press [ 7, STOP].

Press [4 / REW / ] or [ / FF / ¢].

Press [DECK 1/2] (remote control :

[PLAY MODE]).

Note:

• Tape playback is momentarily interrupted if you open the other

deck.

• Tapes exceeding 100 minutes are thin and can break or get caught

in the mechanism.

• Tape slack can get caught up in the mechanism and should be

wound up before the tape is played.

• Endless tapes can get caught up in the deck’s moving parts if used

incorrectly.

Recording

Selection of tapes for recording

Use normal position tapes.

High position and metal position tapes can be used, but this

unit will not be able to record or erase them correctly.

Preparation

Wind up the leader tape so recording can begin

immediately.

1

Press [OPEN 0] for DECK 2 and insert the cassette

to be recorded.

Insert with the side to be recorded facing towards you

and the exposed tape facing down.

2

Select the source to be recorded.

Radio recording:

Tune in the station. (\ page 12)

Disc recording:

➀ Insert the disc(s) you want to record.

Press [6, CD] and then [7, STOP].

➁ Prepare the desired disc recording mode.

To

record

programmed

tracks

Action

Perform steps 2 to 4 in “Program play”

(\ page 8).

For 1-SONG mode:

Press [4, REW / ] or [¢, / FF] to

select the track.

Tape-to-tape recording:

➀ Press [3, TAPE] and then [7, STOP].

➁ Press [0 OPEN] for DECK 1 and insert the cassette

to record.

3 Press [¶, REC] to start recording.

Other basic operations

To

Action

stop recording

Press [7, STOP].

record on the other Turn the cassette over and press [¶, REC].

side of the tape

erase a recorded

sound

1) Press [3, TAPE] and then [7, STOP].

2) Insert the recorded cassette into

DECK 2. Ensure there is no cassette in

DECK 1.

3) Press [¶, REC].

Note:

• Changes to volume and sound adjustments quality do not affect

recording.

• You cannot open DECK 1 while recording.

• You cannot fast-forward or rewind one deck while recording with

the other.

Erasure prevention

The illustration shows how to remove the tabs to prevent

recording. To record on the tape again, cover as shown.

Side A

Tab for side B Tab for side A

To re-record

Normal cassette

Perform steps 3 to 6 in “Program play”

(\ page 8).

Adhesive tape

11

RQT8043

Share Link: