88E1116R-NNC1 View Datasheet(PDF) - Marvell Semiconductor
Part Name
Description
Manufacturer
88E1116R-NNC1 Datasheet PDF : 16 Pages
| |||
Signal Description
Pin Description
Table 7: Test
64-QFN
Pin #
35
36
Pin Name
HSDACN
HSDACP
Pin
Type
O
O
32
TSTPT
O
Description
AC Test Point. Positive and Negative.
These pins are also used to bring out a differential TX_TCLK. Connect
these pins with a 50 ohm termination resistor to VSS for IEEE testing and
debug purposes. If debug and IEEE testing are not of importance, these
pins can be left floating.
Test Point.
Table 8: Control and Reference
64-QFN
Pin #
33
Pin Name
RSET
Pin
Type
I
17
CTRL18
O
12
DIS_REG12 I
Description
Constant voltage reference. External 4.99 kohm 1% resistor connection to
VSS required for each pin.
1.8V Regulator Control. This signal ties to the base of the BJT. If the 1.8V
regulator is not used it can be left floating.
1.2V Regulator Disable. Tie to VDDO to disable, tie to VSS to enable.
Copyright © 2011 Marvell
May 9, 2011, Advance
Document Classification: Proprietary Information
Doc. No. MV-S105539-00, Rev. --
Page 11
Share Link: 