ADSP-21366BBCZ-1AA View Datasheet(PDF) - Analog Devices
Part Name
Description
Manufacturer
ADSP-21366BBCZ-1AA Datasheet PDF : 56 Pages
| |||
ADSP-21362/ADSP-21363/ADSP-21364/ADSP-21365/ADSP-21366
SPECIFICATIONS
Specifications are subject to change without notice.
OPERATING CONDITIONS
K Grade
B Grade
Y Grade
Parameter Description
Min Max
Min Max
Min Max
Unit
VDDINT
Internal (Core) Supply Voltage
1.14 1.26
1.14 1.26
0.95 1.05
V
AVDD
Analog (PLL) Supply Voltage
1.14 1.26
1.14 1.26
0.95 1.05
V
VDDEXT
VIH1
VIL1
VIH_CLKIN2
External (I/O) Supply Voltage
3.13 3.47
3.13 3.47
3.13 3.47
V
High Level Input Voltage @ VDDEXT = Max 2.0 VDDEXT + 0.5 2.0 VDDEXT + 0.5 2.0 VDDEXT + 0.5 V
Low Level Input Voltage @ VDDEXT = Min –0.5 +0.8
–0.5 +0.8
–0.5 +0.8
V
High Level Input Voltage @ VDDEXT = Max 1.74 VDDEXT + 0.5 1.74 VDDEXT + 0.5 1.74 VDDEXT + 0.5 V
VIL_CLKIN
Low Level Input Voltage @ VDDEXT = Min –0.5 +1.19
–0.5 +1.19
–0.5 +1.19
V
TJ3, 4
Junction Temperature 136-Ball CSP_BGA 0 +110
–40 +125
–40 +125
°C
TJ3, 4
Junction Temperature 144-Lead LQFP_EP 0 +110
–40 +125
–40 +125
°C
1 Applies to input and bidirectional pins: AD15–0, FLAG3–0, DAI_Px, SPICLK, MOSI, MISO, SPIDS, BOOT_CFGx, CLK_CFGx, RESET, TCK, TMS, TDI, and TRST.
2 Applies to input pin CLKIN.
3 See ADSP-21362/ADSP-21363/ADSP-21364/ADSP-21365/ADSP-21366 for information on thermal specifications.
4 See Estimating Power for the ADSP-21362 SHARC Processors (EE-277) for further information.
ELECTRICAL CHARACTERISTICS
Parameter
Description
Test Conditions
Min
VOH1
High Level Output Voltage
@ VDDEXT = Min, IOH = –1.0 mA2
2.4
VOL1
Low Level Output Voltage
@ VDDEXT = Min, IOL = 1.0 mA2
IIH3, 4
High Level Input Current
@ VDDEXT = Max, VIN = VDDEXT Max
IIL3
Low Level Input Current
@ VDDEXT = Max, VIN = 0 V
IILPU4
Low Level Input Current Pull-Up
@ VDDEXT = Max, VIN = 0 V
IOZH5, 6
Three-State Leakage Current
@ VDDEXT = Max, VIN = VDDEXT Max
IOZL5
Three-State Leakage Current
@ VDDEXT = Max, VIN = 0 V
IOZLPU6
Three-State Leakage Current Pull-Up
@ VDDEXT = Max, VIN = 0 V
IDD-INTYP7, 8
Supply Current (Internal)
tCCLK = Min, VDDINT = Nom
IAVDD9
Supply Current (Analog)
AVDD = Max
CIN10, 11
Input Capacitance
fIN = 1 MHz, TCASE = 25°C, VIN = 1.2 V
1 Applies to output and bidirectional pins: AD15–0, RD, WR, ALE, FLAG3–0, DAI_Px, SPICLK, MOSI, MISO, EMU, TDO, and XTAL.
2 See Output Drive Currents on Page 44 for typical drive current capabilities.
3 Applies to input pins: SPIDS, BOOT_CFGx, CLK_CFGx, TCK, RESET, and CLKIN.
4 Applies to input pins with 22.5 kΩ internal pull-ups: TRST, TMS, TDI.
5 Applies to three-stateable pins: FLAG3–0.
6 Applies to three-stateable pins with 22.5 kΩ pull-ups: AD15–0, DAI_Px, SPICLK, EMU, MISO, and MOSI.
7 Typical internal current data reflects nominal operating conditions.
8 See Estimating Power for the ADSP-21362 SHARC Processors (EE-277) for further information.
9 Characterized, but not tested.
10Applies to all signal pins.
11Guaranteed, but not tested.
Max
0.4
10
10
200
10
10
200
800
10
4.7
Unit
V
V
μA
μA
μA
μA
μA
μA
mA
mA
pF
Rev. G | Page 14 of 56 | March 2011
Share Link: 