LC65F1306A View Datasheet(PDF) - SANYO -> Panasonic

Part Name

Description

Manufacturer

LC65F1306A

4-Bit Single-Chip CMOS Microcontroller for Small-Scale Control Applications

SANYO -> Panasonic 

LC65F1306A

7) Flexible I/O port

• Number of ports : 5 ports / 18 pins (max.)

• All ports

: Input / output common

Input / output capacity voltage 15V max. (open-drain specification C and D only)

Output current

20 mA max. sink current (Can drive an LED directly)

• Support option for system specification

Output level in the reset mode

: high/low level for port C and D specified in 4-bit unit

8) Interrupt function

Interrupt by timer overflow (can be tested under program control)

Interrupt by the state of the INT pin or completion of transmission/reception at serial I/O port (can be tested under

program control)

9) Stack level : 8 levels (common use with interrupt)

10) Timer :

4-bit variable prescaler + 8-bit programmable counter

11) Clock oscillation options for user’s intended system

• Oscillator circuit options : two-pin RC oscillator

two-pin ceramic oscillator

• Divider circuit options : No divider

built-in divide by 3

built-in divide by 4

12) Continuous square wave output (64 times of the cycle time)

13) AD converter (successive approximation)

• Precise conversion (expressed in 8 bits), 8 input channels

14) Watchdog timer

• RC circuit time constant

• Watchdog timer reset function can be assigned to an external pin by the option.

15) Low voltage detection circuit

• Can be implemented by the option.

16) Factory shipment

• DIP24S, MFP24S

17) Flash Memory

• Rewrite block size :

• Erase / write voltage :

• Rewritable limit :

• Operating temperature :

128 bytes / page

3.0 to 5.5V

10000 times (target number, to be decided after evaluation)

0 to +85°C (when writing to the flash memory)

-20 to +85°C (when reading from the flash memory)

No.6829-2/22

Share Link: