IDTCV107E View Datasheet(PDF) - Integrated Device Technology
Part Name
Description
Manufacturer
IDTCV107E Datasheet PDF : 21 Pages
| |||
IDTCV107E
CLOCK GENERATOR FOR DESKTOP PC PLATFORMS
COMMERCIAL TEMPERATURE RANGE
CPU AND AGP CLOCK FREQUENCY SELECTION
Band switch will take effect only when WD Soft Alarm time out is issued, which means there is a RESET issued. Even if the user changed BS[2:0], if there
is no WD Soft Alarm, CPU PLL still uses the old band.
CPN[9:0] and APN[9:0] will be loaded into PLL only when CPN0 and APN0 are written respectively.
CPU FREQUENCY
Byte 25 bit 0, bit 7
00
01
10
11
CPU Frequency Selected by:
HW FS[1:0]
BS[2:0], CFS[2:0], Byte 25
CPN[9:0] * Band Resolution
CPN[9:0] * Band Resolution
AGP/PCI FREQUENCY
Byte 30 bit 7, bit 6
00
01
10
11
AGP/PCI Frequency Selected by:
66/33
AFS[2:0], Byte 28
APN[9:0] * 0.223721591
APN[9:0] * 0.223721591
WD SOFT AND HARD ALARM/TIME OUT OPERATION
WD HARD ALARM TIMER [7:0]
WD SOFT ALARM TIMER [3:0]
WDE
Trigger Watch Dog Circuit
WD SOFT ALARM TIME OUT
If WD Soft Alarm Enabled:
Set WDSRB
Issue RESET#
Switch CPU PLL band
WD HARD ALARM TIME OUT
Set WDHRB
Issue RESET#
Change CPU Frequency (see Byte 32, bit 7)
Change AGP/PCI Frequency (see Byte 33, bit 4)
If WD FS Relatch enabled, relatch HW FS2, FS1, FS0
Reset Byte 30 bit 7, and Byte 25 bit 0, to 0
User only uses WD Soft Alarm when there is a band switch. It can be from HW to SW select, or in the SW select with band change. Soft Alarm Timer has
to be shorter than Hard Alarm Timer.
At the event of WD Hard Alarm time out, CPU Safe return frequency is decided by two bits: Byte 32 bit 7 and Byte 25 bit 7. AGP/PCI Safe Return Frequency
is decided by Byte 33 bit 4 and Byte 30 bit 6. Byte 30 bit 7, and Byte 25 bit 0, will be reset to 0.
Byte 32 bit 7,
Byte 25 bit 7
00
01
10
11
CPU WD Hard Alarm Time Out Frequency Select:
Latched HW FS[1:0]
BS[2:0], CFS[2:0], Byte 25
WDBS[2:0], WDCFS[2:0], Byte 26 and Byte 32
WDBS[2:0], WDCFS[2:0], Byte 26 and Byte 32
Byte 33 bit 4,
Byte 30 bit 6
00
01
10
11
AGP/PCI Hard Alarm Time Out Frequency Select:
66/33MHz
AFS[2:0], Byte 28
WDAFS, Byte 28
WDAFS, Byte 28
14
Share Link: 