DatasheetQ Logo
Electronic component search and free download site. Transistors,MosFET ,Diode,Integrated circuits

LPC2106BBD48 View Datasheet(PDF) - Philips Electronics

Part Name
Description
Manufacturer
LPC2106BBD48 Datasheet PDF : 32 Pages
First Prev 11 12 13 14 15 16 17 18 19 20 Next Last
Philips Semiconductors
LPC2104/2105/2106
Single-chip 32-bit microcontrollers
Table 4: Interrupt sources…continued
Block
Flag(s)
System Control External Interrupt 0 (EINT0)
System Control External Interrupt 1 (EINT1)
System Control External Interrupt 2 (EINT2)
VIC channel #
14
15
16
6.6 Pin connect block
The pin connect block allows selected pins of the microcontroller to have more than
one function. Configuration registers control the multiplexers to allow connection
between the pin and the on chip peripherals. Peripherals should be connected to the
appropriate pins prior to being activated, and prior to any related interrupt(s) being
enabled. Activity of any enabled peripheral function that is not mapped to a related
pin should be considered undefined.
The Pin Control Module contains two registers as shown in Table 5.
Table 5:
Address
0xE002C000
0xE002C004
Name
PINSEL0
PINSEL1
Description
Pin function select register 0
Pin function select register 1
Access
Read/Write
Read/Write
6.7 Pin function select register 0 (PINSEL0 - 0xE002C000)
The PINSEL0 register controls the functions of the pins as per the settings listed in
Table 6. The direction control bit in the IODIR register is effective only when the GPIO
function is selected for a pin. For other functions, direction is controlled automatically.
Settings other than those shown in Table 6 are reserved, and should not be used
Table 6: Pin function select register 0 (PINSEL0 - 0xE002C000)
PINSEL0 Pin name Value
Function
1:0
P0.0
0
0
GPIO Port 0.0
0
1
TxD (UART 0)
1
0
PWM1
3:2
P0.1
0
0
GPIO Port 0.1
0
1
RxD (UART 0)
1
0
PWM3
5:4
P0.2
0
0
GPIO Port 0.2
0
1
SCL (I2C)
1
0
Capture 0.0 (Timer 0)
7:6
P0.3
0
0
GPIO Port 0.3
0
1
SDA (I2C)
1
0
Match 0.0 (Timer 0)
9:8
P0.4
0
0
GPIO Port 0.4
0
1
SCK (SPI)
1
0
Capture 0.1 (Timer 0)
Value after Reset
0
0
0
0
0
9397 750 12792
Product data
Rev. 04 — 05 February 2004
© Koninklijke Philips Electronics N.V. 2004. All rights reserved.
13 of 32

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]