ACE100 View Datasheet(PDF) - Thaler Corporation
Part Name
Description
Manufacturer
ACE100 Datasheet PDF : 3 Pages
| |||
ACE100
Evaluation Kit For
ADC100 Series A/D Converters
THALER CORPORATION • 2015 N. FORBES BLVD. • TUCSON, AZ. 85745 • (520) 882-4000
FEATURES
o MENU DRIVEN DEMONSTRATION SOFTWARE
THAT IS IBM PC/XT/AT COMPATIBLE
o BENCHTOP EVALUATION BOARD ( 5” X 5”)
o SERIAL AND ANALOG INPUT CABLES
INCLUDED
o LISTING OF BASIC PROGRAMS
o ASSEMBLY DRAWINGS AND SCHEMATIC
o 2 HIGH PRECISION REFERENCES
INCLUDED ON THE BOARD
+/- 5V AND +/- 10V
DESCRIPTION
The ACE100 is a complete system for evaluating
Thaler's ADC100 series of Analog to Digital
Converters. By eliminating bread-boards and
prototypes, evaluation and design-in cycle times
are reduced.
The A/D converter that the user is interested in
evaluating must be specified separately and will be
installed in the board at the factory and calibrated.
The evaluation board is 5" X 5" and is designed to
be set on the table next to an IBM compatible
computer. Connections to the evaluation board
have been minimized to a DB-9 serial cable,
power supply inputs (+5,+15, -15, GND), and
analog inputs for the ADC.
The DB-9 serial cable and shielded analog input
cable are provided with the kit. The evaluation
board also has 2 Thaler high precision references
(± 5 V or ± 10 V) that can be used as inputs to the
ADC.
The power supply inputs require banana plug
terminations to mate with the receptacles on the
evaluation board. See figure 1 for the ACE100
component layout.
The evaluation software is written in QUICK BASIC
and is provided on a 3 1/2" floppy disk. The
program can be read on screen by listing the
ACE100PA.BAS file.
The BASIC software is menu driven and provides
the user with a complete selection of options for
evaluating the A/D converter. Data collection to an
ASCII file is available for individuals who prefer to
use stand alone statistical packages for data
analysis.
ACE100 DS JUN. 99 REV. D
Share Link: 