RH56D-PCI Modem Designer’s Guide
5.2 BASE ADDRESS REGISTER
BIF provides a single Base Address Register. The Base Address Register is a 32 bit register that is used to access the BIF
register set. Bits 3:0 are hard-wired to 0 to indicate memory space. Bits 15-4 will be hard-wired to 0. The remaining bits (31 -
16) will be read/write. This specifies that this device requires a 64k byte address space. After reset, the Base Address
Register contains 0x00000000.
The 64k byte address space used by the BIF is divided into 4k-byte regions. Each 4k-byte region is used as Table 5-6.
Address
[15:12]
0x0
0x1
0x2
0x3
0x4
0x5-0xF
Address
[11:0]
0x0-0xfff
0x0-0xfff
0x0-0xfff
0x0-0xfff
0x0-0xfff
0x0-0xfff
Region Name
BASIC2 Registers
CIS Memory
DSP Scratch Pad
Reserved
Reserved
Reserved.
7DEOH %,) $GGUHVV 0DS
Description
Buffers, control, and status registers
Data loaded from Serial EEPROM for Card Bus applications
Access to DSP scratch pad registers
1213
Conexant
5-5
Conexant Proprietary Information