RH56D-PCI Modem Designer’s Guide
PMC[10] (D2_Support): If this bit is a 1 then function supports the D2 Power Management State. Currently the modems do
not support this state and therefore this field must be 0.
PMC[9] (D1_Support): If this bit is a 1 then function supports the D1 Power Management State. Currently the modems do not
support this state and therefore this field must be 0.
DSI: The Device Specific Initialization bit indicates whether special initialization of this function is required (beyond the
standard PCI configuration header) before the generic class device driver is able to use it. This bit should always be set to
“1”.
NOTE: For more information, refer to PCI Bus Power Management Interface Specification.
1213
Conexant
5-9
Conexant Proprietary Information