SFT825N-S View Datasheet(PDF) - SEOUL SEMICONDUCTOR

Part Name

Description

Manufacturer

SFT825N-S

surface-mount LED comes in PLCC standard package

SEOUL SEMICONDUCTOR 

11. Precaution for use

(1) Storage

In order to avoid the absorption of moisture, it is recommended to store in a dry

box (or a desiccator) with a desiccant. Otherwise, to store them in the following

environment is recommended.

Temperature : 5ºC ~30ºC Humidity : maximum 70%RH

(2) Attention after open.

LED is correspond to SMD, when LED be soldered dip, interfacial separation may

affect the light transmission efficiency, causing the light intensity to drop.

Attention in followed;

Keeping of a fraction

Temperature : 5 ~ 40ºC Humidity : less than 10%

(3) In the case of more than 1 week passed after opening or change color of

indicator on desiccant, components shall be dried 10-12hr. at 60±5ºC.

(4) Any mechanical force or any excess vibration shall not be accepted to apply

during cooling process to normal temperature after soldering.

(5) Quick cooling shall be avoided.

(6) Components shall not be mounted on warped direction of PCB.

(7) Anti radioactive ray design is not considered for the products.

(8) This device should not be used in any type of fluid such as water, oil, organic

solvent etc. When washing is required, IPA should be used.

(9) When the LEDs are illuminating, operating current should be decided after

considering the ambient maximum temperature.

(10) The LEDs must be soldered within seven days after opening the moisture-

proof packing.

(11) Repack unused products with anti-moisture packing, fold to close any opening

and then store in a dry place.

(12) The appearance and specifications of the product may be modified for

improvement without notice.

Rev. 07

June 2009

www.acriche.com

Document No. : SSC-QP-7-07-24 (Rev.00)

Share Link: