AT42QT1110-MZ(2010) View Datasheet(PDF) - Atmel Corporation
Part Name
Description
Manufacturer
AT42QT1110-MZ Datasheet PDF : 48 Pages
| |||
4.1.6 Quick SPI Mode
4.1.6.1
Introduction
In Quick SPI Mode, the QT1110 sends a 7-byte key report at each exchange. No host
commands are required over SPI in this mode; the host clocks the data bytes out in sequence.
4.1.6.2
Quick SPI Report
The 7 report bytes are in the format given in Table 4-1.
Table 4-1. Device Status Report Format
Byte Description
Bit 7 Bit 6
0 Counter
1 Detect status, channels 0 – 3
Channel 3
2 Detect status, channels 4 – 7
Channel 7
3 Detect status, channels 8 – 10
Reserved
4 Error status, channels 0 – 3
Channel 3
5 Error status, channels 4 – 7
Channel 7
6 Error status, channels 8 – 10
Reserved
Bit 5 Bit 4 Bit 3 Bit 2
Counter – increments from 0 to 255
Channel 2
Channel 1
Channel 6
Channel 5
Channel 10
Channel 9
Channel 2
Channel 1
Channel 6
Channel 5
Channel 10
Channel 9
Bit 1 Bit 0
Channel 0
Channel 4
Channel 8
Channel 0
Channel 4
Channel 8
where:
• Byte 0 is a counter that increments from 0 to 254 on successive exchanges to confirm that
firmware is operating correctly.
• Bytes 1 – 3 indicate the detect status of channels 0 – 3, 4 – 7 and 8 – 10 respectively (two
bits per channel), as follows:
– 00 = Channel not in detect
– 01 = Channel in detect
– 10 = Not Allowed
– 11 = Invalid Signal (Channel disabled)
• Bytes 4 – 6 indicate the error status of channels 0 – 3, 4 – 7 and 8 – 10 respectively (two bits
per channel), as follows:
– 00 = No error
– 01 = Not allowed
– 10 = Error on channel
– 11 = Invalid signal (channel disabled)
4.1.6.3
Commands in Quick SPI Mode
Only two host commands are recognized under Quick SPI mode. These are shown in Table 4-2.
Table 4-2. Host Commands in Quick SPI Mode
Command
Code
Purpose
Store to EEPROM
0x0A
Allows for “Quick SPI mode” to be stored as the
default start-up mode
Enable Full SPI
0x36
Enables full SPI mode
CRC checking is not implemented in Quick SPI mode for host commands or return data.
16 AT42QT1110-MZ/AT42QT1110-AZ
9570I–AT42–03/10
Share Link: 