DSP56366 View Datasheet(PDF) - Freescale Semiconductor

Part Name

Description

Manufacturer

DSP56366

24-Bit Audio Digital Signal Processor

Freescale Semiconductor 

3 Specifications

3.1 Introduction

The DSP56366 is a high density CMOS device with Transistor-Transistor Logic (TTL) compatible inputs

and outputs. The DSP56366 specifications are preliminary and are from design simulations, and may not

be fully tested or guaranteed. Finalized specifications will be published after full characterization and

device qualifications are complete.

3.2 Maximum Ratings

CAUTION

This device contains circuitry protecting against damage due to high static

voltage or electrical fields. However, normal precautions should be taken to

avoid exceeding maximum voltage ratings. Reliability of operation is

enhanced if unused inputs are pulled to an appropriate logic voltage level

(e.g., either GND or VCC). The suggested value for a pullup or pulldown

resistor is 10 kΩ.

NOTE

In the calculation of timing requirements, adding a maximum value of one

specification to a minimum value of another specification does not yield a

reasonable sum. A maximum specification is calculated using a worst case

variation of process parameter values in one direction. The minimum

specification is calculated using the worst case for the same parameters in

the opposite direction. Therefore, a “maximum” value for a specification

will never occur in the same device that has a “minimum” value for another

specification; adding a maximum to a minimum represents a condition that

can never exist.

Table 3-1 Maximum Ratings

Rating1

Symbol

Value1, 2

Unit

Supply Voltage

All input voltages excluding “5 V tolerant” inputs3

All “5 V tolerant” input voltages3

VCC

−0.3 to +4.0

V

VIN

GND -0.3 to VCC + 0.3

V

VIN5

GND − 0.3 to VCC + 3.95

V

Current drain per pin excluding VCC and GND

I

10

mA

DSP56366 Technical Data, Rev. 3.1

Freescale Semiconductor

3-1

Share Link: