EBE10RD4AGFA View Datasheet(PDF) - Elpida Memory, Inc

Part Name

Description

Manufacturer

EBE10RD4AGFA

1GB Registered DDR2 SDRAM DIMM

Elpida Memory, Inc 

EBE10RD4AGFA

VDD (power supply pins)

1.8V is applied. (VDD is for the internal circuit.)

VDDSPD (power supply pin)

1.8V is applied (For serial EEPROM).

VSS (power supply pin)

Ground is connected.

/RESET(input pin)

LVCMOS reset input. When /RESET is Low, all registers are reset.

Par_IN (Parity input pin)

Parity bit for the address and control bus.

Err_Out (Error output pin)

Parity error found on the address and control bus.

Detailed Operation Part and Timing Waveforms

Refer to the EDE5104AGSE, EDE5108AGSE datasheet (E0715E). DM pins of component device fixed to VSS level

on the module board. DIMM /CAS latency = component CL + 1 for registered type.

Data Sheet E0795E20 (Ver. 2.0)

20

Share Link: