LPC1776FET180 View Datasheet(PDF) - NXP Semiconductors.

Part Name

Description

Manufacturer

LPC1776FET180

32-bit ARM Cortex-M3 microcontroller; up to 512 kB flash and 96 kB SRAM; USB Device/Host/OTG; Ethernet; LCD; EMC

NXP Semiconductors. 

NXP Semiconductors

LPC178x/7x

32-bit ARM Cortex-M3 microcontroller

Table 3. Pin description …continued

Not all functions are available on all parts. See Table 2 (Ethernet, USB, LCD, QEI, SD/MMC, DAC pins) and Table 7 (EMC

pins).

Symbol

Description

P0[20]

P0[21]

P0[22]

P0[23]

P0[24]

120 M17 K14 83

118 M16 K11 82

116 N17 L14 80

18 H1 F5 13

16 G2 E1 11

[3] I; I/O

PU O

I/O

I/O

[3] I; I/O

PU I

O

O

I

I/O

[6] I; I/O

PU O

I/O

O

O

[5] I; I/O

PU I

I/O

I

[5] I; I/O

PU I

I/O

I

P0[20] — General purpose digital input/output pin.

U1_DTR — Data Terminal Ready output for UART1. Can also

be configured to be an RS-485/EIA-485 output enable signal for

UART1.

SD_CMD — Command line for SD card interface.

I2C1_SCL — I2C1 clock input/output (this pin does not use a

specialized I2C pad).

P0[21] — General purpose digital input/output pin.

U1_RI — Ring Indicator input for UART1.

SD_PWR — Power Supply Enable for external SD card power

supply.

U4_OE — RS-485/EIA-485 output enable signal for UART4.

CAN_RD1 — CAN1 receiver input.

U4_SCLK — USART 4 clock input or output in synchronous

mode.

P0[22] — General purpose digital input/output pin.

U1_RTS — Request to Send output for UART1. Can also be

configured to be an RS-485/EIA-485 output enable signal for

UART1.

SD_DAT[0] — Data line 0 for SD card interface.

U4_TXD — Transmitter output for USART4 (input/output in

smart card mode).

CAN_TD1 — CAN1 transmitter output.

P0[23] — General purpose digital input/output pin.

ADC0_IN[0] — A/D converter 0, input 0. When configured as an

ADC input, the digital function of the pin must be disabled.

I2S_RX_SCK — Receive Clock. It is driven by the master and

received by the slave. Corresponds to the signal SCK in the

I2S-bus specification.

T3_CAP0 — Capture input for Timer 3, channel 0.

P0[24] — General purpose digital input/output pin.

ADC0_IN[1] — A/D converter 0, input 1. When configured as an

ADC input, the digital function of the pin must be disabled.

I2S_RX_WS — Receive Word Select. It is driven by the master

and received by the slave. Corresponds to the signal WS in the

I2S-bus specification.

T3_CAP1 — Capture input for Timer 3, channel 1.

LPC178X_7X

Product data sheet

All information provided in this document is subject to legal disclaimers.

Rev. 5.5 — 26 April 2016

© NXP Semiconductors N.V. 2016. All rights reserved.

14 of 126

Share Link: