LPC1776FET180 View Datasheet(PDF) - NXP Semiconductors.
Part Name
Description
Manufacturer
LPC1776FET180
NXP Semiconductors.
LPC1776FET180 Datasheet PDF : 126 Pages
| |||
NXP Semiconductors
LPC178x/7x
32-bit ARM Cortex-M3 microcontroller
Table 3. Pin description …continued
Not all functions are available on all parts. See Table 2 (Ethernet, USB, LCD, QEI, SD/MMC, DAC pins) and Table 7 (EMC
pins).
Symbol
Description
P0[25]
P0[26]
P0[27]
P0[28]
P0[29]
P0[30]
P0[31]
P1[0] to
P1[31]
P1[0]
14 F1
12 E1
50 T1
48 R3
61 U4
62 R6
51 T2
196 A3
E4 10 [5] I; I/O
PU I
I/O
D1 8
O
[7] I; I/O
PU I
O
I
L3 35 [8] I
I/O
I/O
I/O
M1 34 [8] I
I/O
I/O
I/O
K5 42 [9] I
I/O
I/O
I
N4 43 [9] I
I/O
I/O
I
N1 36 [9] I
I/O
I/O
I/O
B5 136 [3] I; I/O
PU O
-
I
I/O
P0[25] — General purpose digital input/output pin.
ADC0_IN[2] — A/D converter 0, input 2. When configured as an
ADC input, the digital function of the pin must be disabled.
I2S_RX_SDA — Receive data. It is driven by the transmitter
and read by the receiver. Corresponds to the signal SD in the
I2S-bus specification.
U3_TXD — Transmitter output for UART3.
P0[26] — General purpose digital input/output pin.
ADC0_IN[3] — A/D converter 0, input 3. When configured as an
ADC input, the digital function of the pin must be disabled.
DAC_OUT — D/A converter output. When configured as the
DAC output, the digital function of the pin must be disabled.
U3_RXD — Receiver input for UART3.
P0[27] — General purpose digital input/output pin.
I2C0_SDA — I2C0 data input/output (this pin uses a specialized
I2C pad).
USB_SDA1 — I2C serial data for communication with an
external USB transceiver.
P0[28] — General purpose digital input/output pin.
I2C0_SCL — I2C0 clock input/output (this pin uses a
specialized I2C pad).
USB_SCL1 — I2C serial clock for communication with an
external USB transceiver.
P0[29] — General purpose digital input/output pin.
USB_D+1 — USB port 1 bidirectional D+ line.
EINT0 — External interrupt 0 input.
P0[30] — General purpose digital input/output pin.
USB_D1 — USB port 1 bidirectional D line.
EINT1 — External interrupt 1 input.
P0[31] — General purpose digital input/output pin.
USB_D+2 — USB port 2 bidirectional D+ line.
Port 1: Port 1 is a 32 bit I/O port with individual direction
controls for each bit. The operation of port 1 pins depends upon
the pin function selected via the pin connect block
P1[0] — General purpose digital input/output pin.
ENET_TXD0 — Ethernet transmit data 0 (RMII/MII interface).
R — Function reserved.
T3_CAP1 — Capture input for Timer 3, channel 1.
SSP2_SCK — Serial clock for SSP2.
LPC178X_7X
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 5.5 — 26 April 2016
© NXP Semiconductors N.V. 2016. All rights reserved.
15 of 126
Share Link: