LPC1776FET180 View Datasheet(PDF) - NXP Semiconductors.

Part Name

Description

Manufacturer

LPC1776FET180

32-bit ARM Cortex-M3 microcontroller; up to 512 kB flash and 96 kB SRAM; USB Device/Host/OTG; Ethernet; LCD; EMC

NXP Semiconductors. 

NXP Semiconductors

LPC178x/7x

32-bit ARM Cortex-M3 microcontroller

Table 3. Pin description …continued

Not all functions are available on all parts. See Table 2 (Ethernet, USB, LCD, QEI, SD/MMC, DAC pins) and Table 7 (EMC

pins).

Symbol

Description

P1[1]

P1[2]

P1[3]

P1[4]

P1[5]

P1[6]

P1[7]

194 B5 A5

185 D9 B7

177 A10 A9

192 A5 C6

135 [3] I; I/O

PU O

-

O

I/O

-

[3] I; I/O

PU O

O

O

-

[3] I; I/O

PU O

I/O

O

133 [3] I; I/O

PU O

156 A17 B13 -

-

O

I/O

[3] I; I/O

PU O

O

171 B11 B10 -

153 D14 C13 -

O

[3] I; I/O

PU I

I/O

O

[3] I; I/O

PU I

I/O

O

P1[1] — General purpose digital input/output pin.

ENET_TXD1 — Ethernet transmit data 1 (RMII/MII interface).

R — Function reserved.

T3_MAT3 — Match output for Timer 3, channel 3.

SSP2_MOSI — Master Out Slave In for SSP2.

P1[2] — General purpose digital input/output pin.

ENET_TXD2 — Ethernet transmit data 2 (MII interface).

SD_CLK — Clock output line for SD card interface.

PWM0[1] — Pulse Width Modulator 0, output 1.

P1[3] — General purpose digital input/output pin.

ENET_TXD3 — Ethernet transmit data 3 (MII interface).

SD_CMD — Command line for SD card interface.

PWM0[2] — Pulse Width Modulator 0, output 2.

P1[4] — General purpose digital input/output pin.

ENET_TX_EN — Ethernet transmit data enable (RMII/MII

interface).

R — Function reserved.

T3_MAT2 — Match output for Timer 3, channel 2.

SSP2_MISO — Master In Slave Out for SSP2.

P1[5] — General purpose digital input/output pin.

ENET_TX_ER — Ethernet Transmit Error (MII interface).

SD_PWR — Power Supply Enable for external SD card power

supply.

PWM0[3] — Pulse Width Modulator 0, output 3.

P1[6] — General purpose digital input/output pin.

ENET_TX_CLK — Ethernet Transmit Clock (MII interface).

SD_DAT[0] — Data line 0 for SD card interface.

PWM0[4] — Pulse Width Modulator 0, output 4.

P1[7] — General purpose digital input/output pin.

ENET_COL — Ethernet Collision detect (MII interface).

SD_DAT[1] — Data line 1 for SD card interface.

PWM0[5] — Pulse Width Modulator 0, output 5.

LPC178X_7X

Product data sheet

All information provided in this document is subject to legal disclaimers.

Rev. 5.5 — 26 April 2016

© NXP Semiconductors N.V. 2016. All rights reserved.

16 of 126

Share Link: