MT41J128M View Datasheet(PDF) - Micron Technology
Part Name
Description
Manufacturer
MT41J128M Datasheet PDF : 214 Pages
| |||
1Gb: x4, x8, x16 DDR3 SDRAM
Ball Assignments and Descriptions
Table 5: 96-Ball FBGA – x16 Ball Descriptions (Continued)
Symbol
UDM
DQ0, DQ1, DQ2,
DQ3, DQ4, DQ5,
DQ6, DQ7
DQ8, DQ9, DQ10,
DQ11, DQ12,
DQ13, DQ14, DQ15
LDQS, LDQS#
UDQS, UDQS#
VDD
VDDQ
VREFCA
VREFDQ
VSS
VSSQ
ZQ
NC
Type
Input
I/O
I/O
I/O
I/O
Supply
Supply
Supply
Supply
Supply
Supply
Reference
–
Description
Input data mask: UDM is an upper-byte, input mask signal for write data. Upper-
byte input data is masked when UDM is sampled HIGH along with that input data
during a WRITE access. Although the UDM ball is input-only, the UDM loading is
designed to match that of the DQ and DQS balls. UDM is referenced to VREFDQ.
Data input/output: Lower byte of bidirectional data bus for the x16 configuration.
DQ[7:0] are referenced to VREFDQ.
Data input/output: Upper byte of bidirectional data bus for the x16 configuration.
DQ[15:8] are referenced to VREFDQ.
Lower byte data strobe: Output with read data. Edge-aligned with read data.
Input with write data. Center-aligned to write data.
Upper byte data strobe: Output with read data. Edge-aligned with read data.
Input with write data. DQS is center-aligned to write data.
Power supply: 1.5V ±0.075V.
DQ power supply: 1.5V ±0.075V. Isolated on the device for improved noise immuni-
ty.
Reference voltage for control, command, and address: VREFCA must be
maintained at all times (including self refresh) for proper device operation.
Reference voltage for data: VREFDQ must be maintained at all times (excluding self
refresh) for proper device operation.
Ground.
DQ ground: Isolated on the device for improved noise immunity.
External reference ball for output drive calibration: This ball is tied to an
external 240Ω resistor (RZQ), which is tied to VSSQ.
No connect: These balls should be left unconnected (the ball has no connection to
the DRAM or to other balls).
PDF: 09005aef826aa906
1Gb_DDR3_SDRAM.pdf - Rev. L 03/13 EN
24
Micron Technology, Inc. reserves the right to change products or specifications without notice.
2006 Micron Technology, Inc. All rights reserved.
Share Link: 