S25FL127S View Datasheet(PDF) - Spansion Inc.
Part Name
Description
Manufacturer
S25FL127S Datasheet PDF : 131 Pages
| |||
Data Sheet (Preliminary)
5. Electrical Specifications
5.1
Absolute Maximum Ratings
Table 5.1 Absolute Maximum Ratings
Storage Temperature Plastic Packages
-65°C to +150°C
Ambient Temperature with Power Applied
-65°C to +125°C
VCC
Input voltage with respect to Ground (VSS) (Note 1)
Output Short Circuit Current (Note 2)
-0.5V to +4.0V
-0.5V to +(VCC + 0.5V)
100 mA
Notes:
1. See Input Signal Overshoot on page 33 for allowed maximums during signal transition.
2. No more than one output may be shorted to ground at a time. Duration of the short circuit should not be greater than one second.
3. Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device. This is a stress rating only;
functional operation of the device at these or any other conditions above those indicated in the operational sections of this data sheet is
not implied. Exposure of the device to absolute maximum rating conditions for extended periods may affect device reliability.
5.2 Operating Ranges
Operating ranges define those limits between which the functionality of the device is guaranteed.
5.2.1
Temperature Ranges
Industrial (I) Devices
Ambient Temperature (TA)
Automotive (A) In-Cabin
-40°C to +85°C
Ambient Temperature (TA) -40°C to +105°C
Automotive operating and performance parameters will be determined by device characterization and may
vary from standard industrial temperature range devices as currently shown in this specification.
5.2.2
5.2.3
Power Supply Voltage
VCC
2.7V to 3.6V
Input Signal Overshoot
During DC conditions, input or I/O signals should remain equal to or between VSS and VCC. During voltage
transitions, inputs or I/Os may overshoot VSS to –2.0V or overshoot to VCC +2.0V, for periods up to 20 ns.
Figure 5.1 Maximum Negative Overshoot Waveform
20 ns
20 ns
VIL
- 2.0V
20 ns
April 25, 2013 S25FL127S_00_02
S25FL127S
33
Share Link: 